Solar Panels in Reid
Local prices, rebates, sun and network figures for Reid, so you know the numbers before you talk to anyone. 11% of homes here already have solar.
Australian Capital Territory, STC Zone 3. Evoenergy network, with flexible exports available.
One Why Solar Approved installer, one free written quote, and fifteen minutes with a solar expert before you sign.
- Homes with solar in 2612
- 11%
- Peak sun hours a day
- 4.5
- Average system
- 9.8 kW
- Typical feed-in tariff, ACT
- 7.0c
- Export limit
- 5 kW
- Optimal tilt
- 34°
- Installations in 2612
- 1,006
Solar potential in Reid
Reid receives 4.5 peak sun hours per day on average. The optimal panel angle is 34° facing north.
| System | Average day | Year |
|---|---|---|
| 6.6 kW | 25.2 kWh | 9,214 kWh |
| 10 kW | 38.3 kWh | 13,961 kWh |
| 13 kW | 49.7 kWh | 18,150 kWh |
Estimated: system size times 4.5 peak sun hours (the 2612 area average) times 85% for inverter, heat and wiring losses, over 365 average days. The savings and payback above use the same output. Orientation, shading and the equipment your installer quotes change it.
Daily/Monthly System Energy Output Estimates
Here's what you can expect to generate with various sized solar power systems in the Reid 2612 area, assuming good quality components, a suitable rooftop and professional, accredited solar installation.
Mean daily production for 6.6kW of solar panels in Reid, ACT, 2612
Estimates based on 4.5 peak sun hours and 85% system efficiency. Actual output varies with panel orientation, shading, and weather.
Monthly Solar Irradiation
Average daily solar energy (kWh/m²/day) reaching the Reid area throughout the year compared to the Australian national average.
Based on Bureau of Meteorology solar exposure data. Actual values may vary based on weather conditions.
Solar in Reid vs National Average
2612 has 10.5 systems per 100 homes, -68% vs the national average (33.3).
Based on 1,006 installations, 4.5 peak sun hours, 9.8kW avg system.
thermostatInsulation impact on solar savings in Reid
How much of your solar generation gets consumed by heating and cooling, based on your home's insulation quality. Data sourced from NatHERS climate zone 24 (Canberra).
Higher self-consumption means less solar energy exported. In a well-insulated home, more generation is exported at the feed-in tariff rate rather than consumed by heating/cooling.
Based on ABCB NatHERS climate zone 24 load limits for a 150m² home. Actual consumption varies by home design, orientation, and occupant behaviour.
Grid connection in Reid
Evoenergy
Your electricity network distributor for Reid.
- Export limit
- 5 kW
- Flexible exports available
- Days to connect
- 10
- Typical timeframe
- Pre-approval threshold
- 5 kW+
- Systems above it need approval
Feed-in tariffs in Reid
Rate range in ACT
Typical usage rate in ACT: 26.0c/kWh
Use it before you export it. With the feed-in tariff at 7.0c and usage at 26.0c, every kWh you use yourself saves you 19.0c more than exporting. A battery helps you use more of it.
See what Reid homeowners are paying
6.6 kW systems in 2612 range from $5,200 to $7,500 fully installed, after the $1,710 federal rebate.
How to choose a solar installer in Reid
SAA accreditation
Only use installers accredited by Solar Accreditation Australia (SAA). Accreditation is mandatory for STC rebate eligibility.
A written quote
Get a detailed quote from a vetted local installer. Prices in 2612 range from $5,200 to $7,500 for 6.6 kW.
Tier-1 equipment
Insist on tier-1 panels and a reputable inverter. This protects your 25-year performance warranty.
Local council requirements
No approval required
Most residential solar installations in ACT are exempt under the Planning and Development Regulation 2008.
- Roof-mounted panels on residential buildings
- Systems under 10kW on single-phase
- No change to building structure
Your SAA installer will handle
- Grid connection application to your DNSP
- Electrical safety certificates
- STC rebate paperwork
- Meter upgrade coordination
Heritage and conservation areas. Heritage registered properties need Heritage Council approval. If your home is heritage-listed or in a conservation area, check with your council before you sign.
Local government area
Reid 2612 is in the Unincorporated ACT council area. Your installer will handle all necessary paperwork and approvals as part of the installation process.
ACT planning portal(opens in a new tab)Solar for heritage homes
Data sources: CER, ABS, BOM, Global Solar Atlas
4.5 kWh/m²/day avg solar exposure · 1,006 installations in 2612 · 11% penetration · BOM station 4.6 km from Reid
Solar trends in the 2612 postcode
- Growth on last year
- 45%
- 91 installs last year
- Average system size
- 9.8 kW
- Installed in 2612
Solar FAQ for Reid
How much does solar cost in Reid 2612?
What's the payback period for solar in Reid?
What rebates are available in ACT?
What feed-in tariff can I get in Reid?
Can I export solar power in Reid 2612?
How do I find a good solar installer in Reid 2612?
Is commercial solar available in Reid?
Local data reviewed by
Written by
Andy McMasterSolar Installer Partner Relations
Connects homeowners with trusted, vetted solar installers across Australia. Andy works directly with installation companies to ensure quality standards and helps homeowners through the quoting process.
Learn more about Andy McMasterCheck your rebate in Reid
11% of homes in Reid already have solar. One Why Solar Approved installer, one free written quote, and fifteen minutes with a solar expert before you sign.
Solar in nearby suburbs
Are you a solar installer servicing Reid? Buy pre-qualified Canberra solar leads