Solar Panels in Holder
Local prices, rebates, sun and network figures for Holder, so you know the numbers before you talk to anyone. 53% of homes here already have solar.
Australian Capital Territory, STC Zone 3. Evoenergy network, with flexible exports available.
One Why Solar Approved installer, one free written quote, and fifteen minutes with a solar expert before you sign.
- Homes with solar
- 53%
- Peak sun hours a day
- 4.5
- Average system
- 8.1 kW
- Best feed-in tariff
- 8.1c
- Export limit
- 5 kW
- Optimal tilt
- 34°
- SAA installers in the area
- 22+
- Installations in 2611
- 7,536
151 batteries installed in the 2611 postcode area in the last 6 months (up 26%).
Solar potential in Holder
Holder receives 4.5 peak sun hours per day on average. The optimal panel angle is 34° facing north. Summer output is about 151% of winter.
| System | Average day | Year |
|---|---|---|
| 6.6 kW | 25.2 kWh | 9,214 kWh |
| 10 kW | 38.3 kWh | 13,961 kWh |
| 13 kW | 49.7 kWh | 18,150 kWh |
Daily/Monthly System Energy Output Estimates
Here's what you can expect to generate with various sized solar power systems in the Holder 2611 area, assuming good quality components, a suitable rooftop and professional, accredited solar installation.
Mean daily production for 6.6kW of solar panels in Holder, ACT, 2611
Estimates based on 4.5 peak sun hours and 80% system efficiency. Actual output varies with panel orientation, shading, and weather.
Monthly Solar Irradiation
Average daily solar energy (kWh/m²/day) reaching the Holder area throughout the year compared to the Australian national average.
Based on Bureau of Meteorology solar exposure data. Actual values may vary based on weather conditions.
Solar in Holder vs National Average
2611 has 52.9 systems per 100 homes, +59% vs the national average (33.3).
Based on 7,536 installations, 4.5 peak sun hours, 8.1kW avg system.
thermostatInsulation impact on solar savings in Holder
How much of your solar generation gets consumed by heating and cooling, based on your home's insulation quality. Data sourced from NatHERS climate zone 24 (Canberra).
Higher self-consumption means less solar energy exported. In a well-insulated home, more generation is exported at the feed-in tariff rate rather than consumed by heating/cooling.
Based on ABCB NatHERS climate zone 24 load limits for a 150m² home. Actual consumption varies by home design, orientation, and occupant behaviour.
Grid connection in Holder
Evoenergy
Your electricity network distributor for Holder.
- Export limit
- 5 kW
- Flexible exports available
- Days to connect
- 10
- Typical timeframe
- Pre-approval threshold
- 5 kW+
- Systems above it need approval
Feed-in tariffs in Holder
Best available rate
8.1c/kWh
from AGL
Rate range in ACT
Average electricity rate: 26.5c/kWh
Use it before you export it. With the feed-in tariff at 8.1c and usage at 26.5c, every kWh you use yourself saves you 18.4c more than exporting. A battery helps you use more of it.
See what Holder homeowners are paying
6.6 kW systems in 2611 range from $5,200 to $7,500 fully installed, after the $1,710 federal rebate.
How to choose a solar installer in Holder
SAA accreditation
Only use installers accredited by Solar Accreditation Australia (SAA). Accreditation is mandatory for STC rebate eligibility.
A written quote
Get a detailed quote from a vetted local installer. Prices in 2611 range from $5,200 to $7,500 for 6.6 kW.
Tier-1 equipment
Insist on tier-1 panels and a reputable inverter. This protects your 25-year performance warranty.
Local council requirements
No approval required
Most residential solar installations in ACT are exempt under the Planning and Development Regulation 2008.
- Roof-mounted panels on residential buildings
- Systems under 10kW on single-phase
- No change to building structure
Your SAA installer will handle
- Grid connection application to your DNSP
- Electrical safety certificates
- STC rebate paperwork
- Meter upgrade coordination
Local government area
Holder 2611 is in the Snowy Valleys council area. Your installer will handle all necessary paperwork and approvals as part of the installation process.
ACT planning portal(opens in a new tab)Solar for heritage homes
Data sources: CER, ABS, BOM, Global Solar Atlas
4.5 kWh/m²/day avg solar exposure · 7,536 installations in 2611 · 53% penetration · BOM station 5.9 km from Holder
Solar trends in Holder
- Growth on last year
- -8%
- 562 installs last year
- Average system size
- 8.1 kW
- Installed locally
- Batteries installed
- 603
- +26% growth rate
- Most popular inverter
- SolarEdge
- Most installed locally
Solar FAQ for Holder
How much does solar cost in Holder 2611?
What's the payback period for solar in Holder?
What rebates are available in ACT?
What feed-in tariff can I get in Holder?
Can I export solar power in Holder 2611?
How do I find a good solar installer in Holder 2611?
Is commercial solar available in Holder?
Local data reviewed by
Written by
Andy McMasterSolar Installer Partner Relations
Connects homeowners with trusted, vetted solar installers across Australia. Andy works directly with installation companies to ensure quality standards and helps homeowners navigate the quoting process.
Learn more about Andy McMasterCheck your rebate in Holder
53% of homes in Holder already have solar. One Why Solar Approved installer, one free written quote, and fifteen minutes with a solar expert before you sign.
Are you a solar installer servicing Holder? Buy pre-qualified Canberra solar leads