Solar Panels in Erobin
Local prices, rebates, sun and network figures for Erobin, so you know the numbers before you talk to anyone. 80% of homes here already have solar.
Queensland, STC Zone 3. Energex network, with flexible exports available.
One Why Solar Approved installer, one free written quote, and fifteen minutes with a solar expert before you sign.
- Homes with solar in 4160
- 80%
- Peak sun hours a day
- 5.0
- Average system
- 5.7 kW
- Typical feed-in tariff, QLD
- 7.0c
- Export limit
- 5 kW
- Optimal tilt
- 27°
- Installations in 4160
- 5,718
Solar potential in Erobin
Erobin receives 5.0 peak sun hours per day on average. The optimal panel angle is 27° facing north.
| System | Average day | Year |
|---|---|---|
| 6.6 kW | 28.1 kWh | 10,238 kWh |
| 10 kW | 42.5 kWh | 15,513 kWh |
| 13 kW | 55.3 kWh | 20,166 kWh |
Estimated: system size times 5.0 peak sun hours (the 4160 area average) times 85% for inverter, heat and wiring losses, over 365 average days. The savings and payback above use the same output. Orientation, shading and the equipment your installer quotes change it.
Daily/Monthly System Energy Output Estimates
Here's what you can expect to generate with various sized solar power systems in the Erobin 4160 area, assuming good quality components, a suitable rooftop and professional, accredited solar installation.
Mean daily production for 6.6kW of solar panels in Erobin, QLD, 4160
Estimates based on 5 peak sun hours and 85% system efficiency. Actual output varies with panel orientation, shading, and weather.
Monthly Solar Irradiation
Average daily solar energy (kWh/m²/day) reaching the Erobin area throughout the year compared to the Australian national average.
Based on Bureau of Meteorology solar exposure data. Actual values may vary based on weather conditions.
Solar in Erobin vs National Average
4160 has 80.0 systems per 100 homes, +140% vs the national average (33.3).
Based on 5,718 installations, 5.0 peak sun hours, 5.7kW avg system.
thermostatInsulation impact on solar savings in Erobin
How much of your solar generation gets consumed by heating and cooling, based on your home's insulation quality. Data sourced from NatHERS climate zone 10 (Brisbane).
Higher self-consumption means less solar energy exported. In a well-insulated home, more generation is exported at the feed-in tariff rate rather than consumed by heating/cooling.
Based on ABCB NatHERS climate zone 10 load limits for a 150m² home. Actual consumption varies by home design, orientation, and occupant behaviour.
Grid connection in Erobin
Energex
Your electricity network distributor for Erobin.
- Export limit
- 5 kW
- Flexible exports available
- Days to connect
- 10
- Typical timeframe
- Pre-approval threshold
- 5 kW+
- Systems above it need approval
Feed-in tariffs in Erobin
Rate range in QLD
Typical usage rate in QLD: 26.0c/kWh
Use it before you export it. With the feed-in tariff at 7.0c and usage at 26.0c, every kWh you use yourself saves you 19.0c more than exporting. A battery helps you use more of it.
See what Erobin homeowners are paying
6.6 kW systems in 4160 range from $4,784 to $6,900 fully installed, after the $1,710 federal rebate.
How to choose a solar installer in Erobin
SAA accreditation
Only use installers accredited by Solar Accreditation Australia (SAA). Accreditation is mandatory for STC rebate eligibility.
A written quote
Get a detailed quote from a vetted local installer. Prices in 4160 range from $4,784 to $6,900 for 6.6 kW.
Tier-1 equipment
Insist on tier-1 panels and a reputable inverter. This protects your 25-year performance warranty.
Local council requirements
No approval required
Most residential solar installations in QLD are exempt under the Queensland Planning Regulation 2017.
- Roof-mounted panels on residential buildings
- Systems under 10kW on single-phase
- No change to building structure
Your SAA installer will handle
- Grid connection application to your DNSP
- Electrical safety certificates
- STC rebate paperwork
- Meter upgrade coordination
Heritage and conservation areas. State or local heritage places may require approval. If your home is heritage-listed or in a conservation area, check with your council before you sign.
Local government area
Erobin 4160 is in the Redland council area. Your installer will handle all necessary paperwork and approvals as part of the installation process.
QLD planning portal(opens in a new tab)Solar for heritage homes
Data sources: CER, ABS, BOM, Global Solar Atlas
5.0 kWh/m²/day avg solar exposure · 5,718 installations in 4160 · 80% penetration · BOM station 9.7 km from Erobin
Solar trends in the 4160 postcode
- Growth on last year
- -9%
- 355 installs last year
- Average system size
- 5.7 kW
- Installed in 4160
Solar FAQ for Erobin
How much does solar cost in Erobin 4160?
What's the payback period for solar in Erobin?
What rebates are available in QLD?
What feed-in tariff can I get in Erobin?
Can I export solar power in Erobin 4160?
How do I find a good solar installer in Erobin 4160?
Is commercial solar available in Erobin?
Local data reviewed by
Written by
Andy McMasterSolar Installer Partner Relations
Connects homeowners with trusted, vetted solar installers across Australia. Andy works directly with installation companies to ensure quality standards and helps homeowners through the quoting process.
Learn more about Andy McMasterCheck your rebate in Erobin
80% of homes in Erobin already have solar. One Why Solar Approved installer, one free written quote, and fifteen minutes with a solar expert before you sign.
Solar in nearby suburbs
Are you a solar installer servicing Erobin? Buy pre-qualified Brisbane solar leads