Solar Panels in Bardwell Valley
Local prices, rebates, sun and network figures for Bardwell Valley, so you know the numbers before you talk to anyone. 21% of homes here already have solar.
New South Wales, STC Zone 3. Ausgrid network, with flexible exports available.
One Why Solar Approved installer, one free written quote, and fifteen minutes with a solar expert before you sign.
- Homes with solar in 2207
- 21%
- Peak sun hours a day
- 4.7
- Average system
- 7.2 kW
- Typical feed-in tariff, NSW
- 6.5c
- Export limit
- 10 kW
- Optimal tilt
- 34°
- Installations in 2207
- 2,134
Solar potential in Bardwell Valley
Bardwell Valley receives 4.7 peak sun hours per day on average. The optimal panel angle is 34° facing north.
| System | Average day | Year |
|---|---|---|
| 6.6 kW | 26.4 kWh | 9,624 kWh |
| 10 kW | 40 kWh | 14,582 kWh |
| 13 kW | 51.9 kWh | 18,956 kWh |
Estimated: system size times 4.7 peak sun hours (the 2207 area average) times 85% for inverter, heat and wiring losses, over 365 average days. The savings and payback above use the same output. Orientation, shading and the equipment your installer quotes change it.
Daily/Monthly System Energy Output Estimates
Here's what you can expect to generate with various sized solar power systems in the Bardwell Valley 2207 area, assuming good quality components, a suitable rooftop and professional, accredited solar installation.
Mean daily production for 6.6kW of solar panels in Bardwell Valley, NSW, 2207
Estimates based on 4.7 peak sun hours and 85% system efficiency. Actual output varies with panel orientation, shading, and weather.
Monthly Solar Irradiation
Average daily solar energy (kWh/m²/day) reaching the Bardwell Valley area throughout the year compared to the Australian national average.
Based on Bureau of Meteorology solar exposure data. Actual values may vary based on weather conditions.
Solar in Bardwell Valley vs National Average
2207 has 21.3 systems per 100 homes, -36% vs the national average (33.3).
Based on 2,134 installations, 4.7 peak sun hours, 7.2kW avg system.
thermostatInsulation impact on solar savings in Bardwell Valley
How much of your solar generation gets consumed by heating and cooling, based on your home's insulation quality. Data sourced from NatHERS climate zone 17 (Sydney).
Higher self-consumption means less solar energy exported. In a well-insulated home, more generation is exported at the feed-in tariff rate rather than consumed by heating/cooling.
Based on ABCB NatHERS climate zone 17 load limits for a 150m² home. Actual consumption varies by home design, orientation, and occupant behaviour.
Grid connection in Bardwell Valley
Ausgrid
Your electricity network distributor for Bardwell Valley.
- Export limit
- 10 kW
- Flexible exports available
- Days to connect
- 10
- Typical timeframe
- Pre-approval threshold
- 10 kW+
- Systems above it need approval
Feed-in tariffs in Bardwell Valley
Rate range in NSW
Typical usage rate in NSW: 32.0c/kWh
Use it before you export it. With the feed-in tariff at 6.5c and usage at 32.0c, every kWh you use yourself saves you 25.5c more than exporting. A battery helps you use more of it.
See what Bardwell Valley homeowners are paying
6.6 kW systems in 2207 range from $5,200 to $7,500 fully installed, after the $1,710 federal rebate.
How to choose a solar installer in Bardwell Valley
SAA accreditation
Only use installers accredited by Solar Accreditation Australia (SAA). Accreditation is mandatory for STC rebate eligibility.
A written quote
Get a detailed quote from a vetted local installer. Prices in 2207 range from $5,200 to $7,500 for 6.6 kW.
Tier-1 equipment
Insist on tier-1 panels and a reputable inverter. This protects your 25-year performance warranty.
Local council requirements
No approval required
Most residential solar installations in NSW are exempt under the SEPP (Exempt and Complying Development) 2008.
- Roof-mounted panels on residential buildings
- Systems under 10kW on single-phase
- No change to building structure
Your SAA installer will handle
- Grid connection application to your DNSP
- Electrical safety certificates
- STC rebate paperwork
- Meter upgrade coordination
Heritage and conservation areas. Heritage conservation areas may require Development Application (DA). If your home is heritage-listed or in a conservation area, check with your council before you sign.
Local government area
Bardwell Valley 2207 is in the Bayside (NSW) council area. Your installer will handle all necessary paperwork and approvals as part of the installation process.
NSW planning portal(opens in a new tab)Solar for heritage homes
Data sources: CER, ABS, BOM, Global Solar Atlas
4.7 kWh/m²/day avg solar exposure · 2,134 installations in 2207 · 21% penetration · BOM station 3.8 km from Bardwell Valley
Solar trends in the 2207 postcode
- Growth on last year
- -25%
- 191 installs last year
- Average system size
- 7.2 kW
- Installed in 2207
Solar FAQ for Bardwell Valley
How much does solar cost in Bardwell Valley 2207?
What's the payback period for solar in Bardwell Valley?
What rebates are available in NSW?
What feed-in tariff can I get in Bardwell Valley?
Can I export solar power in Bardwell Valley 2207?
How do I find a good solar installer in Bardwell Valley 2207?
Is commercial solar available in Bardwell Valley?
Local data reviewed by
Written by
Andy McMasterSolar Installer Partner Relations
Connects homeowners with trusted, vetted solar installers across Australia. Andy works directly with installation companies to ensure quality standards and helps homeowners through the quoting process.
Learn more about Andy McMasterCheck your rebate in Bardwell Valley
21% of homes in Bardwell Valley already have solar. One Why Solar Approved installer, one free written quote, and fifteen minutes with a solar expert before you sign.
Solar in nearby suburbs
Are you a solar installer servicing Bardwell Valley? Buy pre-qualified Sydney solar leads