Solar Panels in Regency Park
Local prices, rebates, sun and network figures for Regency Park, so you know the numbers before you talk to anyone. 65% of homes here already have solar.
South Australia, STC Zone 3. SA Power Networks network, with flexible exports available.
One Why Solar Approved installer, one free written quote, and fifteen minutes with a solar expert before you sign.
- Homes with solar
- 65%
- Peak sun hours a day
- 4.7
- Average system
- 8.8 kW
- Best feed-in tariff
- 9.0c
- Export limit
- 5 kW
- Optimal tilt
- 34°
- SAA installers in the area
- 45+
- Installations in 5010
- 1,492
30 batteries installed in the 5010 postcode area in the last 6 months (up 25%).
Solar potential in Regency Park
Regency Park receives 4.7 peak sun hours per day on average. The optimal panel angle is 34° facing north. Summer output is about 150% of winter.
| System | Average day | Year |
|---|---|---|
| 6.6 kW | 26.4 kWh | 9,624 kWh |
| 10 kW | 40 kWh | 14,582 kWh |
| 13 kW | 51.9 kWh | 18,956 kWh |
Daily/Monthly System Energy Output Estimates
Here's what you can expect to generate with various sized solar power systems in the Regency Park 5010 area, assuming good quality components, a suitable rooftop and professional, accredited solar installation.
Mean daily production for 6.6kW of solar panels in Regency Park, SA, 5010
Estimates based on 4.7 peak sun hours and 80% system efficiency. Actual output varies with panel orientation, shading, and weather.
Monthly Solar Irradiation
Average daily solar energy (kWh/m²/day) reaching the Regency Park area throughout the year compared to the Australian national average.
Based on Bureau of Meteorology solar exposure data. Actual values may vary based on weather conditions.
Solar in Regency Park vs National Average
5010 has 65.3 systems per 100 homes, +96% vs the national average (33.3).
Based on 1,492 installations, 4.7 peak sun hours, 8.8kW avg system.
thermostatInsulation impact on solar savings in Regency Park
How much of your solar generation gets consumed by heating and cooling, based on your home's insulation quality. Data sourced from NatHERS climate zone 16 (Adelaide).
Higher self-consumption means less solar energy exported. In a well-insulated home, more generation is exported at the feed-in tariff rate rather than consumed by heating/cooling.
Based on ABCB NatHERS climate zone 16 load limits for a 150m² home. Actual consumption varies by home design, orientation, and occupant behaviour.
Grid connection in Regency Park
SA Power Networks
Your electricity network distributor for Regency Park.
- Export limit
- 5 kW
- Flexible exports available
- Days to connect
- 10
- Typical timeframe
- Pre-approval threshold
- 5 kW+
- Systems above it need approval
Feed-in tariffs in Regency Park
Best available rate
9.0c/kWh
from Origin
Rate range in SA
Average electricity rate: 35.0c/kWh
Use it before you export it. With the feed-in tariff at 9.0c and usage at 35.0c, every kWh you use yourself saves you 26.0c more than exporting. A battery helps you use more of it.
See what Regency Park homeowners are paying
6.6 kW systems in 5010 range from $5,304 to $7,650 fully installed, after the $1,710 federal rebate.
How to choose a solar installer in Regency Park
SAA accreditation
Only use installers accredited by Solar Accreditation Australia (SAA). Accreditation is mandatory for STC rebate eligibility.
A written quote
Get a detailed quote from a vetted local installer. Prices in 5010 range from $5,304 to $7,650 for 6.6 kW.
Tier-1 equipment
Insist on tier-1 panels and a reputable inverter. This protects your 25-year performance warranty.
Local council requirements
No approval required
Most residential solar installations in SA are exempt under the Planning, Development and Infrastructure Act 2016.
- Roof-mounted panels on residential buildings
- Systems under 10kW on single-phase
- No change to building structure
Your SAA installer will handle
- Grid connection application to your DNSP
- Electrical safety certificates
- STC rebate paperwork
- Meter upgrade coordination
Local government area
Regency Park 5010 is in the Port Adelaide Enfield council area. Your installer will handle all necessary paperwork and approvals as part of the installation process.
SA planning portal(opens in a new tab)Solar for heritage homes
Data sources: CER, ABS, BOM, Global Solar Atlas
4.7 kWh/m²/day avg solar exposure · 1,492 installations in 5010 · 65% penetration · BOM station 7.4 km from Regency Park
Solar trends in Regency Park
- Growth on last year
- -25%
- 68 installs last year
- Average system size
- 8.8 kW
- Installed locally
- Batteries installed
- 119
- +25% growth rate
- Most popular inverter
- Fronius
- Most installed locally
Solar FAQ for Regency Park
How much does solar cost in Regency Park 5010?
What's the payback period for solar in Regency Park?
What rebates are available in SA?
What feed-in tariff can I get in Regency Park?
Can I export solar power in Regency Park 5010?
How do I find a good solar installer in Regency Park 5010?
Is commercial solar available in Regency Park?
Local data reviewed by
Written by
Andy McMasterSolar Installer Partner Relations
Connects homeowners with trusted, vetted solar installers across Australia. Andy works directly with installation companies to ensure quality standards and helps homeowners through the quoting process.
Learn more about Andy McMasterCheck your rebate in Regency Park
65% of homes in Regency Park already have solar. One Why Solar Approved installer, one free written quote, and fifteen minutes with a solar expert before you sign.
Are you a solar installer servicing Regency Park? Buy pre-qualified Adelaide solar leads