Solar Panels in Oakford
Local prices, rebates, sun and network figures for Oakford, so you know the numbers before you talk to anyone. 98% of homes here already have solar.
Western Australia, STC Zone 3. Western Power network, with flexible exports available.
One Why Solar Approved installer, one free written quote, and fifteen minutes with a solar expert before you sign.
- Homes with solar in 6121
- 98%
- Peak sun hours a day
- 5.3
- Average system
- 7.4 kW
- Typical feed-in tariff, WA
- 3.5c
- Export limit
- 5 kW
- Optimal tilt
- 34°
- Installations in 6121
- 992
Solar potential in Oakford
Oakford receives 5.3 peak sun hours per day on average. The optimal panel angle is 34° facing north.
| System | Average day | Year |
|---|---|---|
| 6.6 kW | 29.7 kWh | 10,853 kWh |
| 10 kW | 45.1 kWh | 16,443 kWh |
| 13 kW | 58.6 kWh | 21,376 kWh |
Estimated: system size times 5.3 peak sun hours (the 6121 area average) times 85% for inverter, heat and wiring losses, over 365 average days. The savings and payback above use the same output. Orientation, shading and the equipment your installer quotes change it.
Daily/Monthly System Energy Output Estimates
Here's what you can expect to generate with various sized solar power systems in the Oakford 6121 area, assuming good quality components, a suitable rooftop and professional, accredited solar installation.
Mean daily production for 6.6kW of solar panels in Oakford, WA, 6121
Estimates based on 5.3 peak sun hours and 85% system efficiency. Actual output varies with panel orientation, shading, and weather.
Monthly Solar Irradiation
Average daily solar energy (kWh/m²/day) reaching the Oakford area throughout the year compared to the Australian national average.
Based on Bureau of Meteorology solar exposure data. Actual values may vary based on weather conditions.
Solar in Oakford vs National Average
6121 has 98.2 systems per 100 homes, +195% vs the national average (33.3).
Based on 992 installations, 5.3 peak sun hours, 7.4kW avg system.
thermostatInsulation impact on solar savings in Oakford
How much of your solar generation gets consumed by heating and cooling, based on your home's insulation quality. Data sourced from NatHERS climate zone 13 (Perth).
Higher self-consumption means less solar energy exported. In a well-insulated home, more generation is exported at the feed-in tariff rate rather than consumed by heating/cooling.
Based on ABCB NatHERS climate zone 13 load limits for a 150m² home. Actual consumption varies by home design, orientation, and occupant behaviour.
Grid connection in Oakford
Western Power
Your electricity network distributor for Oakford.
- Export limit
- 5 kW
- Flexible exports available
- Days to connect
- 10
- Typical timeframe
- Pre-approval threshold
- 5 kW+
- Systems above it need approval
Feed-in tariffs in Oakford
Rate range in WA
Typical usage rate in WA: 30.0c/kWh
Use it before you export it. With the feed-in tariff at 3.5c and usage at 30.0c, every kWh you use yourself saves you 26.5c more than exporting. A battery helps you use more of it.
See what Oakford homeowners are paying
6.6 kW systems in 6121 range from $5,460 to $7,875 fully installed, after the $1,710 federal rebate.
How to choose a solar installer in Oakford
SAA accreditation
Only use installers accredited by Solar Accreditation Australia (SAA). Accreditation is mandatory for STC rebate eligibility.
A written quote
Get a detailed quote from a vetted local installer. Prices in 6121 range from $5,460 to $7,875 for 6.6 kW.
Tier-1 equipment
Insist on tier-1 panels and a reputable inverter. This protects your 25-year performance warranty.
Local council requirements
No approval required
Most residential solar installations in WA are exempt under the Planning and Development Regulations 2015.
- Roof-mounted panels on residential buildings
- Systems under 10kW on single-phase
- No change to building structure
Your SAA installer will handle
- Grid connection application to your DNSP
- Electrical safety certificates
- STC rebate paperwork
- Meter upgrade coordination
Heritage and conservation areas. Heritage listed properties need Heritage Council approval. If your home is heritage-listed or in a conservation area, check with your council before you sign.
Local government area
Oakford 6121 is in the Serpentine-Jarrahdale council area. Your installer will handle all necessary paperwork and approvals as part of the installation process.
WA planning portal(opens in a new tab)Solar for heritage homes
Data sources: CER, ABS, BOM, Global Solar Atlas
5.3 kWh/m²/day avg solar exposure · 992 installations in 6121 · 98% penetration · BOM station 12.6 km from Oakford
Solar trends in the 6121 postcode
- Growth on last year
- -16%
- 45 installs last year
- Average system size
- 7.4 kW
- Installed in 6121
Solar FAQ for Oakford
How much does solar cost in Oakford 6121?
What's the payback period for solar in Oakford?
What rebates are available in WA?
What feed-in tariff can I get in Oakford?
Can I export solar power in Oakford 6121?
How do I find a good solar installer in Oakford 6121?
Is commercial solar available in Oakford?
Local data reviewed by
Written by
Andy McMasterSolar Installer Partner Relations
Connects homeowners with trusted, vetted solar installers across Australia. Andy works directly with installation companies to ensure quality standards and helps homeowners through the quoting process.
Learn more about Andy McMasterCheck your rebate in Oakford
98% of homes in Oakford already have solar. One Why Solar Approved installer, one free written quote, and fifteen minutes with a solar expert before you sign.
Solar in nearby suburbs
Are you a solar installer servicing Oakford? Buy pre-qualified Perth solar leads