Solar Panels in Nattai
Local prices, rebates, sun and network figures for Nattai, so you know the numbers before you talk to anyone. 56% of homes here already have solar.
New South Wales, STC Zone 3. Ausgrid network, with flexible exports available.
One Why Solar Approved installer, one free written quote, and fifteen minutes with a solar expert before you sign.
- Homes with solar in 2570
- 56%
- Peak sun hours a day
- 4.4
- Average system
- 8.3 kW
- Typical feed-in tariff, NSW
- 6.5c
- Export limit
- 10 kW
- Optimal tilt
- 34°
- Installations in 2570
- 11,824
Solar potential in Nattai
Nattai receives 4.4 peak sun hours per day on average. The optimal panel angle is 34° facing north.
| System | Average day | Year |
|---|---|---|
| 6.6 kW | 24.7 kWh | 9,010 kWh |
| 10 kW | 37.4 kWh | 13,651 kWh |
| 13 kW | 48.6 kWh | 17,746 kWh |
Estimated: system size times 4.4 peak sun hours (the 2570 area average) times 85% for inverter, heat and wiring losses, over 365 average days. The savings and payback above use the same output. Orientation, shading and the equipment your installer quotes change it.
Daily/Monthly System Energy Output Estimates
Here's what you can expect to generate with various sized solar power systems in the Nattai 2570 area, assuming good quality components, a suitable rooftop and professional, accredited solar installation.
Mean daily production for 6.6kW of solar panels in Nattai, NSW, 2570
Estimates based on 4.4 peak sun hours and 85% system efficiency. Actual output varies with panel orientation, shading, and weather.
Monthly Solar Irradiation
Average daily solar energy (kWh/m²/day) reaching the Nattai area throughout the year compared to the Australian national average.
Based on Bureau of Meteorology solar exposure data. Actual values may vary based on weather conditions.
Solar in Nattai vs National Average
2570 has 56.0 systems per 100 homes, +68% vs the national average (33.3).
Based on 11,824 installations, 4.4 peak sun hours, 8.3kW avg system.
thermostatInsulation impact on solar savings in Nattai
How much of your solar generation gets consumed by heating and cooling, based on your home's insulation quality. Data sourced from NatHERS climate zone 18 (Nowra).
Higher self-consumption means less solar energy exported. In a well-insulated home, more generation is exported at the feed-in tariff rate rather than consumed by heating/cooling.
Based on ABCB NatHERS climate zone 18 load limits for a 150m² home. Actual consumption varies by home design, orientation, and occupant behaviour.
Grid connection in Nattai
Ausgrid
Your electricity network distributor for Nattai.
- Export limit
- 10 kW
- Flexible exports available
- Days to connect
- 10
- Typical timeframe
- Pre-approval threshold
- 10 kW+
- Systems above it need approval
Feed-in tariffs in Nattai
Rate range in NSW
Typical usage rate in NSW: 32.0c/kWh
Use it before you export it. With the feed-in tariff at 6.5c and usage at 32.0c, every kWh you use yourself saves you 25.5c more than exporting. A battery helps you use more of it.
See what Nattai homeowners are paying
6.6 kW systems in 2570 range from $5,200 to $7,500 fully installed, after the $1,710 federal rebate.
How to choose a solar installer in Nattai
SAA accreditation
Only use installers accredited by Solar Accreditation Australia (SAA). Accreditation is mandatory for STC rebate eligibility.
A written quote
Get a detailed quote from a vetted local installer. Prices in 2570 range from $5,200 to $7,500 for 6.6 kW.
Tier-1 equipment
Insist on tier-1 panels and a reputable inverter. This protects your 25-year performance warranty.
Local council requirements
No approval required
Most residential solar installations in NSW are exempt under the SEPP (Exempt and Complying Development) 2008.
- Roof-mounted panels on residential buildings
- Systems under 10kW on single-phase
- No change to building structure
Your SAA installer will handle
- Grid connection application to your DNSP
- Electrical safety certificates
- STC rebate paperwork
- Meter upgrade coordination
Heritage and conservation areas. Heritage conservation areas may require Development Application (DA). If your home is heritage-listed or in a conservation area, check with your council before you sign.
Local government area
Nattai 2570 is in the Wollondilly council area. Your installer will handle all necessary paperwork and approvals as part of the installation process.
NSW planning portal(opens in a new tab)Solar for heritage homes
Data sources: CER, ABS, BOM, Global Solar Atlas
4.4 kWh/m²/day avg solar exposure · 11,824 installations in 2570 · 56% penetration · BOM station 20.4 km from Nattai
Solar trends in the 2570 postcode
- Growth on last year
- -6%
- 910 installs last year
- Average system size
- 8.3 kW
- Installed in 2570
Solar FAQ for Nattai
How much does solar cost in Nattai 2570?
What's the payback period for solar in Nattai?
What rebates are available in NSW?
What feed-in tariff can I get in Nattai?
Can I export solar power in Nattai 2570?
How do I find a good solar installer in Nattai 2570?
Is commercial solar available in Nattai?
Local data reviewed by
Written by
Andy McMasterSolar Installer Partner Relations
Connects homeowners with trusted, vetted solar installers across Australia. Andy works directly with installation companies to ensure quality standards and helps homeowners through the quoting process.
Learn more about Andy McMasterCheck your rebate in Nattai
56% of homes in Nattai already have solar. One Why Solar Approved installer, one free written quote, and fifteen minutes with a solar expert before you sign.