Solar Panels in Maldon
Local prices, rebates, sun and network figures for Maldon, so you know the numbers before you talk to anyone. 75% of homes here already have solar.
New South Wales, STC Zone 3. Ausgrid network, with flexible exports available.
One Why Solar Approved installer, one free written quote, and fifteen minutes with a solar expert before you sign.
- Homes with solar in 2571
- 75%
- Peak sun hours a day
- 4.4
- Average system
- 8.3 kW
- Typical feed-in tariff, NSW
- 6.5c
- Export limit
- 10 kW
- Optimal tilt
- 34°
- Installations in 2571
- 3,355
Solar potential in Maldon
Maldon receives 4.4 peak sun hours per day on average. The optimal panel angle is 34° facing north.
| System | Average day | Year |
|---|---|---|
| 6.6 kW | 24.7 kWh | 9,010 kWh |
| 10 kW | 37.4 kWh | 13,651 kWh |
| 13 kW | 48.6 kWh | 17,746 kWh |
Estimated: system size times 4.4 peak sun hours (the 2571 area average) times 85% for inverter, heat and wiring losses, over 365 average days. The savings and payback above use the same output. Orientation, shading and the equipment your installer quotes change it.
Daily/Monthly System Energy Output Estimates
Here's what you can expect to generate with various sized solar power systems in the Maldon 2571 area, assuming good quality components, a suitable rooftop and professional, accredited solar installation.
Mean daily production for 6.6kW of solar panels in Maldon, NSW, 2571
Estimates based on 4.4 peak sun hours and 85% system efficiency. Actual output varies with panel orientation, shading, and weather.
Monthly Solar Irradiation
Average daily solar energy (kWh/m²/day) reaching the Maldon area throughout the year compared to the Australian national average.
Based on Bureau of Meteorology solar exposure data. Actual values may vary based on weather conditions.
Solar in Maldon vs National Average
2571 has 75.3 systems per 100 homes, +126% vs the national average (33.3).
Based on 3,355 installations, 4.4 peak sun hours, 8.3kW avg system.
thermostatInsulation impact on solar savings in Maldon
How much of your solar generation gets consumed by heating and cooling, based on your home's insulation quality. Data sourced from NatHERS climate zone 18 (Nowra).
Higher self-consumption means less solar energy exported. In a well-insulated home, more generation is exported at the feed-in tariff rate rather than consumed by heating/cooling.
Based on ABCB NatHERS climate zone 18 load limits for a 150m² home. Actual consumption varies by home design, orientation, and occupant behaviour.
Grid connection in Maldon
Ausgrid
Your electricity network distributor for Maldon.
- Export limit
- 10 kW
- Flexible exports available
- Days to connect
- 10
- Typical timeframe
- Pre-approval threshold
- 10 kW+
- Systems above it need approval
Feed-in tariffs in Maldon
Rate range in NSW
Typical usage rate in NSW: 32.0c/kWh
Use it before you export it. With the feed-in tariff at 6.5c and usage at 32.0c, every kWh you use yourself saves you 25.5c more than exporting. A battery helps you use more of it.
See what Maldon homeowners are paying
6.6 kW systems in 2571 range from $5,200 to $7,500 fully installed, after the $1,710 federal rebate.
How to choose a solar installer in Maldon
SAA accreditation
Only use installers accredited by Solar Accreditation Australia (SAA). Accreditation is mandatory for STC rebate eligibility.
A written quote
Get a detailed quote from a vetted local installer. Prices in 2571 range from $5,200 to $7,500 for 6.6 kW.
Tier-1 equipment
Insist on tier-1 panels and a reputable inverter. This protects your 25-year performance warranty.
Local council requirements
No approval required
Most residential solar installations in NSW are exempt under the SEPP (Exempt and Complying Development) 2008.
- Roof-mounted panels on residential buildings
- Systems under 10kW on single-phase
- No change to building structure
Your SAA installer will handle
- Grid connection application to your DNSP
- Electrical safety certificates
- STC rebate paperwork
- Meter upgrade coordination
Heritage and conservation areas. Heritage conservation areas may require Development Application (DA). If your home is heritage-listed or in a conservation area, check with your council before you sign.
Local government area
Maldon 2571 is in the Wingecarribee council area. Your installer will handle all necessary paperwork and approvals as part of the installation process.
NSW planning portal(opens in a new tab)Solar for heritage homes
Data sources: CER, ABS, BOM, Global Solar Atlas
4.4 kWh/m²/day avg solar exposure · 3,355 installations in 2571 · 75% penetration · BOM station 18.0 km from Maldon
Solar trends in the 2571 postcode
- Growth on last year
- -24%
- 282 installs last year
- Average system size
- 8.3 kW
- Installed in 2571
Solar FAQ for Maldon
How much does solar cost in Maldon 2571?
What's the payback period for solar in Maldon?
What rebates are available in NSW?
What feed-in tariff can I get in Maldon?
Can I export solar power in Maldon 2571?
How do I find a good solar installer in Maldon 2571?
Is commercial solar available in Maldon?
Local data reviewed by
Written by
Andy McMasterSolar Installer Partner Relations
Connects homeowners with trusted, vetted solar installers across Australia. Andy works directly with installation companies to ensure quality standards and helps homeowners through the quoting process.
Learn more about Andy McMasterCheck your rebate in Maldon
75% of homes in Maldon already have solar. One Why Solar Approved installer, one free written quote, and fifteen minutes with a solar expert before you sign.