Solar Panels in Kilburn
Local prices, rebates, sun and network figures for Kilburn, so you know the numbers before you talk to anyone. 46% of homes here already have solar.
South Australia, STC Zone 3. SA Power Networks network, with flexible exports available.
One Why Solar Approved installer, one free written quote, and fifteen minutes with a solar expert before you sign.
- Homes with solar in 5084
- 46%
- Peak sun hours a day
- 4.7
- Average system
- 7.5 kW
- Typical feed-in tariff, SA
- 8.0c
- Export limit
- 5 kW
- Optimal tilt
- 34°
- Installations in 5084
- 1,887
Solar potential in Kilburn
Kilburn receives 4.7 peak sun hours per day on average. The optimal panel angle is 34° facing north.
| System | Average day | Year |
|---|---|---|
| 6.6 kW | 26.4 kWh | 9,624 kWh |
| 10 kW | 40 kWh | 14,582 kWh |
| 13 kW | 51.9 kWh | 18,956 kWh |
Estimated: system size times 4.7 peak sun hours (the 5084 area average) times 85% for inverter, heat and wiring losses, over 365 average days. The savings and payback above use the same output. Orientation, shading and the equipment your installer quotes change it.
Daily/Monthly System Energy Output Estimates
Here's what you can expect to generate with various sized solar power systems in the Kilburn 5084 area, assuming good quality components, a suitable rooftop and professional, accredited solar installation.
Mean daily production for 6.6kW of solar panels in Kilburn, SA, 5084
Estimates based on 4.7 peak sun hours and 85% system efficiency. Actual output varies with panel orientation, shading, and weather.
Monthly Solar Irradiation
Average daily solar energy (kWh/m²/day) reaching the Kilburn area throughout the year compared to the Australian national average.
Based on Bureau of Meteorology solar exposure data. Actual values may vary based on weather conditions.
Solar in Kilburn vs National Average
5084 has 45.7 systems per 100 homes, +37% vs the national average (33.3).
Based on 1,887 installations, 4.7 peak sun hours, 7.5kW avg system.
thermostatInsulation impact on solar savings in Kilburn
How much of your solar generation gets consumed by heating and cooling, based on your home's insulation quality. Data sourced from NatHERS climate zone 16 (Adelaide).
Higher self-consumption means less solar energy exported. In a well-insulated home, more generation is exported at the feed-in tariff rate rather than consumed by heating/cooling.
Based on ABCB NatHERS climate zone 16 load limits for a 150m² home. Actual consumption varies by home design, orientation, and occupant behaviour.
Grid connection in Kilburn
SA Power Networks
Your electricity network distributor for Kilburn.
- Export limit
- 5 kW
- Flexible exports available
- Days to connect
- 10
- Typical timeframe
- Pre-approval threshold
- 5 kW+
- Systems above it need approval
Feed-in tariffs in Kilburn
Rate range in SA
Typical usage rate in SA: 35.0c/kWh
Use it before you export it. With the feed-in tariff at 8.0c and usage at 35.0c, every kWh you use yourself saves you 27.0c more than exporting. A battery helps you use more of it.
See what Kilburn homeowners are paying
6.6 kW systems in 5084 range from $5,304 to $7,650 fully installed, after the $1,710 federal rebate.
How to choose a solar installer in Kilburn
SAA accreditation
Only use installers accredited by Solar Accreditation Australia (SAA). Accreditation is mandatory for STC rebate eligibility.
A written quote
Get a detailed quote from a vetted local installer. Prices in 5084 range from $5,304 to $7,650 for 6.6 kW.
Tier-1 equipment
Insist on tier-1 panels and a reputable inverter. This protects your 25-year performance warranty.
Local council requirements
No approval required
Most residential solar installations in SA are exempt under the Planning, Development and Infrastructure Act 2016.
- Roof-mounted panels on residential buildings
- Systems under 10kW on single-phase
- No change to building structure
Your SAA installer will handle
- Grid connection application to your DNSP
- Electrical safety certificates
- STC rebate paperwork
- Meter upgrade coordination
Heritage and conservation areas. Historic conservation areas require Development Approval. If your home is heritage-listed or in a conservation area, check with your council before you sign.
Local government area
Kilburn 5084 is in the Port Adelaide Enfield council area. Your installer will handle all necessary paperwork and approvals as part of the installation process.
SA planning portal(opens in a new tab)Solar for heritage homes
Data sources: CER, ABS, BOM, Global Solar Atlas
4.7 kWh/m²/day avg solar exposure · 1,887 installations in 5084 · 46% penetration · BOM station 7.4 km from Kilburn
Solar trends in the 5084 postcode
- Growth on last year
- -18%
- 129 installs last year
- Average system size
- 7.5 kW
- Installed in 5084
Solar FAQ for Kilburn
How much does solar cost in Kilburn 5084?
What's the payback period for solar in Kilburn?
What rebates are available in SA?
What feed-in tariff can I get in Kilburn?
Can I export solar power in Kilburn 5084?
How do I find a good solar installer in Kilburn 5084?
Is commercial solar available in Kilburn?
Local data reviewed by
Written by
Andy McMasterSolar Installer Partner Relations
Connects homeowners with trusted, vetted solar installers across Australia. Andy works directly with installation companies to ensure quality standards and helps homeowners through the quoting process.
Learn more about Andy McMasterCheck your rebate in Kilburn
46% of homes in Kilburn already have solar. One Why Solar Approved installer, one free written quote, and fifteen minutes with a solar expert before you sign.
Solar in nearby suburbs
Are you a solar installer servicing Kilburn? Buy pre-qualified Adelaide solar leads