Solar Panels in Hope Valley
Local prices, rebates, sun and network figures for Hope Valley, so you know the numbers before you talk to anyone. 60% of homes here already have solar.
South Australia, STC Zone 3. SA Power Networks network, with flexible exports available.
One Why Solar Approved installer, one free written quote, and fifteen minutes with a solar expert before you sign.
- Homes with solar in 5090
- 60%
- Peak sun hours a day
- 4.7
- Average system
- 5.1 kW
- Typical feed-in tariff, SA
- 8.0c
- Export limit
- 5 kW
- Optimal tilt
- 34°
- Installations in 5090
- 2,087
Solar potential in Hope Valley
Hope Valley receives 4.7 peak sun hours per day on average. The optimal panel angle is 34° facing north.
| System | Average day | Year |
|---|---|---|
| 6.6 kW | 26.4 kWh | 9,624 kWh |
| 10 kW | 40 kWh | 14,582 kWh |
| 13 kW | 51.9 kWh | 18,956 kWh |
Estimated: system size times 4.7 peak sun hours (the 5090 area average) times 85% for inverter, heat and wiring losses, over 365 average days. The savings and payback above use the same output. Orientation, shading and the equipment your installer quotes change it.
Daily/Monthly System Energy Output Estimates
Here's what you can expect to generate with various sized solar power systems in the Hope Valley 5090 area, assuming good quality components, a suitable rooftop and professional, accredited solar installation.
Mean daily production for 6.6kW of solar panels in Hope Valley, SA, 5090
Estimates based on 4.7 peak sun hours and 85% system efficiency. Actual output varies with panel orientation, shading, and weather.
Monthly Solar Irradiation
Average daily solar energy (kWh/m²/day) reaching the Hope Valley area throughout the year compared to the Australian national average.
Based on Bureau of Meteorology solar exposure data. Actual values may vary based on weather conditions.
Solar in Hope Valley vs National Average
5090 has 59.9 systems per 100 homes, +80% vs the national average (33.3).
Based on 2,087 installations, 4.7 peak sun hours, 5.1kW avg system.
thermostatInsulation impact on solar savings in Hope Valley
How much of your solar generation gets consumed by heating and cooling, based on your home's insulation quality. Data sourced from NatHERS climate zone 16 (Adelaide).
Higher self-consumption means less solar energy exported. In a well-insulated home, more generation is exported at the feed-in tariff rate rather than consumed by heating/cooling.
Based on ABCB NatHERS climate zone 16 load limits for a 150m² home. Actual consumption varies by home design, orientation, and occupant behaviour.
Grid connection in Hope Valley
SA Power Networks
Your electricity network distributor for Hope Valley.
- Export limit
- 5 kW
- Flexible exports available
- Days to connect
- 10
- Typical timeframe
- Pre-approval threshold
- 5 kW+
- Systems above it need approval
Feed-in tariffs in Hope Valley
Rate range in SA
Typical usage rate in SA: 35.0c/kWh
Use it before you export it. With the feed-in tariff at 8.0c and usage at 35.0c, every kWh you use yourself saves you 27.0c more than exporting. A battery helps you use more of it.
See what Hope Valley homeowners are paying
6.6 kW systems in 5090 range from $5,304 to $7,650 fully installed, after the $1,710 federal rebate.
How to choose a solar installer in Hope Valley
SAA accreditation
Only use installers accredited by Solar Accreditation Australia (SAA). Accreditation is mandatory for STC rebate eligibility.
A written quote
Get a detailed quote from a vetted local installer. Prices in 5090 range from $5,304 to $7,650 for 6.6 kW.
Tier-1 equipment
Insist on tier-1 panels and a reputable inverter. This protects your 25-year performance warranty.
Local council requirements
No approval required
Most residential solar installations in SA are exempt under the Planning, Development and Infrastructure Act 2016.
- Roof-mounted panels on residential buildings
- Systems under 10kW on single-phase
- No change to building structure
Your SAA installer will handle
- Grid connection application to your DNSP
- Electrical safety certificates
- STC rebate paperwork
- Meter upgrade coordination
Heritage and conservation areas. Historic conservation areas require Development Approval. If your home is heritage-listed or in a conservation area, check with your council before you sign.
Local government area
Hope Valley 5090 is in the Tea Tree Gully council area. Your installer will handle all necessary paperwork and approvals as part of the installation process.
SA planning portal(opens in a new tab)Solar for heritage homes
Data sources: CER, ABS, BOM, Global Solar Atlas
4.7 kWh/m²/day avg solar exposure · 2,087 installations in 5090 · 60% penetration · BOM station 8.2 km from Hope Valley
Solar trends in the 5090 postcode
- Growth on last year
- 0%
- 74 installs last year
- Average system size
- 5.1 kW
- Installed in 5090
Solar FAQ for Hope Valley
How much does solar cost in Hope Valley 5090?
What's the payback period for solar in Hope Valley?
What rebates are available in SA?
What feed-in tariff can I get in Hope Valley?
Can I export solar power in Hope Valley 5090?
How do I find a good solar installer in Hope Valley 5090?
Is commercial solar available in Hope Valley?
Local data reviewed by

Written by
Andy McMasterSolar Installer Partner Relations
Connects homeowners with trusted, vetted solar installers across Australia. Andy works directly with installation companies to ensure quality standards and helps homeowners through the quoting process.
Learn more about Andy McMasterCheck your rebate in Hope Valley
60% of homes in Hope Valley already have solar. One Why Solar Approved installer, one free written quote, and fifteen minutes with a solar expert before you sign.
Solar in nearby suburbs
Are you a solar installer servicing Hope Valley? Buy pre-qualified Adelaide solar leads