Solar Panels in Currambine
Local prices, rebates, sun and network figures for Currambine, so you know the numbers before you talk to anyone. 76% of homes here already have solar.
Western Australia, STC Zone 3. Western Power network, with flexible exports available.
One Why Solar Approved installer, one free written quote, and fifteen minutes with a solar expert before you sign.
- Homes with solar in 6028
- 76%
- Peak sun hours a day
- 5.3
- Average system
- 5.5 kW
- Typical feed-in tariff, WA
- 3.5c
- Export limit
- 5 kW
- Optimal tilt
- 34°
- Installations in 6028
- 6,210
Solar potential in Currambine
Currambine receives 5.3 peak sun hours per day on average. The optimal panel angle is 34° facing north.
| System | Average day | Year |
|---|---|---|
| 6.6 kW | 29.7 kWh | 10,853 kWh |
| 10 kW | 45.1 kWh | 16,443 kWh |
| 13 kW | 58.6 kWh | 21,376 kWh |
Estimated: system size times 5.3 peak sun hours (the 6028 area average) times 85% for inverter, heat and wiring losses, over 365 average days. The savings and payback above use the same output. Orientation, shading and the equipment your installer quotes change it.
Daily/Monthly System Energy Output Estimates
Here's what you can expect to generate with various sized solar power systems in the Currambine 6028 area, assuming good quality components, a suitable rooftop and professional, accredited solar installation.
Mean daily production for 6.6kW of solar panels in Currambine, WA, 6028
Estimates based on 5.3 peak sun hours and 85% system efficiency. Actual output varies with panel orientation, shading, and weather.
Monthly Solar Irradiation
Average daily solar energy (kWh/m²/day) reaching the Currambine area throughout the year compared to the Australian national average.
Based on Bureau of Meteorology solar exposure data. Actual values may vary based on weather conditions.
Solar in Currambine vs National Average
6028 has 75.6 systems per 100 homes, +127% vs the national average (33.3).
Based on 6,210 installations, 5.3 peak sun hours, 5.5kW avg system.
thermostatInsulation impact on solar savings in Currambine
How much of your solar generation gets consumed by heating and cooling, based on your home's insulation quality. Data sourced from NatHERS climate zone 13 (Perth).
Higher self-consumption means less solar energy exported. In a well-insulated home, more generation is exported at the feed-in tariff rate rather than consumed by heating/cooling.
Based on ABCB NatHERS climate zone 13 load limits for a 150m² home. Actual consumption varies by home design, orientation, and occupant behaviour.
Grid connection in Currambine
Western Power
Your electricity network distributor for Currambine.
- Export limit
- 5 kW
- Flexible exports available
- Days to connect
- 10
- Typical timeframe
- Pre-approval threshold
- 5 kW+
- Systems above it need approval
Feed-in tariffs in Currambine
Rate range in WA
Typical usage rate in WA: 30.0c/kWh
Use it before you export it. With the feed-in tariff at 3.5c and usage at 30.0c, every kWh you use yourself saves you 26.5c more than exporting. A battery helps you use more of it.
See what Currambine homeowners are paying
6.6 kW systems in 6028 range from $5,460 to $7,875 fully installed, after the $1,710 federal rebate.
How to choose a solar installer in Currambine
SAA accreditation
Only use installers accredited by Solar Accreditation Australia (SAA). Accreditation is mandatory for STC rebate eligibility.
A written quote
Get a detailed quote from a vetted local installer. Prices in 6028 range from $5,460 to $7,875 for 6.6 kW.
Tier-1 equipment
Insist on tier-1 panels and a reputable inverter. This protects your 25-year performance warranty.
Local council requirements
No approval required
Most residential solar installations in WA are exempt under the Planning and Development Regulations 2015.
- Roof-mounted panels on residential buildings
- Systems under 10kW on single-phase
- No change to building structure
Your SAA installer will handle
- Grid connection application to your DNSP
- Electrical safety certificates
- STC rebate paperwork
- Meter upgrade coordination
Heritage and conservation areas. Heritage listed properties need Heritage Council approval. If your home is heritage-listed or in a conservation area, check with your council before you sign.
Local government area
Currambine 6028 is in the Joondalup council area. Your installer will handle all necessary paperwork and approvals as part of the installation process.
WA planning portal(opens in a new tab)Solar for heritage homes
Data sources: CER, ABS, BOM, Global Solar Atlas
5.3 kWh/m²/day avg solar exposure · 6,210 installations in 6028 · 76% penetration · BOM station 2.0 km from Currambine
Solar trends in the 6028 postcode
- Growth on last year
- -8%
- 301 installs last year
- Average system size
- 5.5 kW
- Installed in 6028
Solar FAQ for Currambine
How much does solar cost in Currambine 6028?
What's the payback period for solar in Currambine?
What rebates are available in WA?
What feed-in tariff can I get in Currambine?
Can I export solar power in Currambine 6028?
How do I find a good solar installer in Currambine 6028?
Is commercial solar available in Currambine?
Local data reviewed by
Written by
Andy McMasterSolar Installer Partner Relations
Connects homeowners with trusted, vetted solar installers across Australia. Andy works directly with installation companies to ensure quality standards and helps homeowners through the quoting process.
Learn more about Andy McMasterCheck your rebate in Currambine
76% of homes in Currambine already have solar. One Why Solar Approved installer, one free written quote, and fifteen minutes with a solar expert before you sign.
Solar in nearby suburbs
Are you a solar installer servicing Currambine? Buy pre-qualified Perth solar leads