Solar Panels in Chippendale
Prices, rebates, sun and network figures for Chippendale, so you know the numbers before you talk to anyone. 3% of homes here already have solar.
New South Wales, STC Zone 3. Ausgrid network, with flexible exports available.
One Why Solar Approved installer, one free written quote, and fifteen minutes with a solar expert before you sign.
- Homes with solar in 2008
- 3%
- Peak sun hours a day
- 4.5
- Average system
- 9.7 kW
- Typical feed-in tariff, NSW
- 6.5c
- Export limit
- 10 kW
- Optimal tilt
- 34°
- Installations in 2008
- 137
Solar potential in Chippendale
Chippendale receives 4.5 peak sun hours per day on average. The optimal panel angle is 34° facing north.
| System | Average day | Year |
|---|---|---|
| 6.6 kW | 25.2 kWh | 9,214 kWh |
| 10 kW | 38.3 kWh | 13,961 kWh |
| 13 kW | 49.7 kWh | 18,150 kWh |
Estimated: system size times 4.5 peak sun hours (the 2008 area average) times 85% for inverter, heat and wiring losses, over 365 average days. Orientation, shading and the equipment on your quote change it.
Daily/Monthly System Energy Output Estimates
Here's what you can expect to generate with various sized solar power systems in the Chippendale 2008 area, assuming good quality components, a suitable rooftop and professional, accredited solar installation.
Mean daily production for 6.6kW of solar panels in Chippendale, NSW, 2008
Estimates based on 4.5 peak sun hours and 85% system efficiency. Actual output varies with panel orientation, shading, and weather.
Monthly Solar Irradiation
Average daily solar energy (kWh/m²/day) reaching the Chippendale area throughout the year compared to the Australian national average.
Based on Bureau of Meteorology solar exposure data. Actual values may vary based on weather conditions.
Solar in Chippendale vs National Average
2008 has 2.5 systems per 100 homes, -92% vs the national average (33.3).
Based on 137 installations, 4.5 peak sun hours, 9.7kW avg system.
thermostatInsulation impact on solar savings in Chippendale
How much of your solar generation gets consumed by heating and cooling, based on your home's insulation quality. Data sourced from NatHERS climate zone 17 (Sydney).
Higher self-consumption means less solar energy exported. In a well-insulated home, more generation is exported at the feed-in tariff rate rather than consumed by heating/cooling.
Based on ABCB NatHERS climate zone 17 load limits for a 150m² home. Actual consumption varies by home design, orientation, and occupant behaviour.
Grid connection in Chippendale
Ausgrid
Your electricity network distributor for Chippendale.
- Export limit
- 10 kW
- Flexible exports available
- Days to connect
- 10
- Typical timeframe
- Pre-approval threshold
- 10 kW+
- Systems above it need approval
Feed-in tariffs in Chippendale
Rate range in NSW
Typical usage rate in NSW: 32.0c/kWh
Use it before you export it. With the feed-in tariff at 6.5c and usage at 32.0c, every kWh you use yourself saves you 25.5c more than exporting. A battery helps you use more of it.
See what Chippendale homeowners are paying
How to choose a solar installer in Chippendale
SAA accreditation
Only use installers accredited by Solar Accreditation Australia (SAA). Accreditation is mandatory for STC rebate eligibility.
A written quote
Get a detailed quote from a vetted local installer.
Tier-1 equipment
Insist on tier-1 panels and a reputable inverter. This protects your 25-year performance warranty.
Local council requirements
No approval required
Most residential solar installations in NSW are exempt under the SEPP (Exempt and Complying Development) 2008.
- Roof-mounted panels on residential buildings
- Systems under 10kW on single-phase
- No change to building structure
Your SAA installer will handle
- Grid connection application to your DNSP
- Electrical safety certificates
- STC rebate paperwork
- Meter upgrade coordination
Heritage and conservation areas. Heritage conservation areas may require Development Application (DA). If your home is heritage-listed or in a conservation area, check with your council before you sign.
Local government area
Chippendale 2008 is in the Sydney council area. Your installer will handle all necessary paperwork and approvals as part of the installation process.
NSW planning portal(opens in a new tab)Solar for heritage homes
Data sources: CER, ABS, BOM, Global Solar Atlas
4.5 kWh/m²/day avg solar exposure · 137 installations in 2008 · 3% penetration · BOM station 2.9 km from Chippendale
Solar trends in the 2008 postcode
- Growth on last year
- 22%
- 9 installs last year
- Average system size
- 9.7 kW
- Installed in 2008
Solar FAQ for Chippendale
How much does solar cost in Chippendale 2008?
What decides how much solar saves in Chippendale?
What rebates are available in NSW?
What feed-in tariff can I get in Chippendale?
Can I export solar power in Chippendale 2008?
How do I find a good solar installer in Chippendale 2008?
Is commercial solar available in Chippendale?
Local data reviewed by

Written by
Andy McMasterSolar Installer Partner Relations
Connects homeowners with trusted, vetted solar installers across Australia. Andy works directly with installation companies to ensure quality standards and helps homeowners through the quoting process.
Learn more about Andy McMasterCheck your rebate in Chippendale
3% of homes in Chippendale already have solar. One Why Solar Approved installer, one free written quote, and fifteen minutes with a solar expert before you sign.
Solar in nearby suburbs
Are you a solar installer servicing Chippendale? Buy pre-qualified Sydney solar leads