Fox ESS A Series A7300 7.3kW, photo 1 of 1
Fox ESS logoFox ESSEV Charger

A Series A7300 7.3kW

OCPP
Yes
Type
Home EV Charger
Cable
Tethered
Power
7.3kW
See my rebate

One Why Solar Approved installer, one written quote, and a 15-minute call with a solar expert before you sign.

Specifications last updated

The Fox ESS A Series A7300 7.3kW is an EV charger from Fox ESS. Its main specifications are type Home EV Charger, cable Tethered, power 7.3kW, phases Single.

We checked these specifications against the manufacturer's documents on 26 October 2026 but could only partly confirm them. Treat the figures as a guide and confirm the exact model number and its ratings on your quote.

Availability in Australia

Fox ESS Australia publishes an Australian A Series datasheet dated 20 August 2026 and Australian retailers list the A7300.

What the specifications mean

At 7.3 kW, 7.3 kWh goes into the car each hour at full power. As an illustration, a 60 kWh battery charged from empty to full would take about 8.2 hours. The car's own onboard charger and your home's supply can lower that, so the real speed is the lowest of the three.

It is a single phase charger. Three phase charging needs a three phase supply at the switchboard, and a single phase supply limits any charger to about 7 kW.

It has a solar surplus mode, which slows or speeds charging to follow the spare solar output instead of drawing from the grid. How well that works depends on how it measures your solar, so ask your installer which meter or sensor it needs.

It supports load management, so it can reduce its draw when the rest of the house is using a lot of power. That helps avoid upgrading the switchboard or supply.

The cable is tethered. A tethered charger has the cable fixed to it. A socketed one takes your own Type 2 cable.

Rebates and installation

Home EV chargers are not on the Clean Energy Council approved lists, so the federal solar and battery rebates do not apply to the charger itself. State and network programs vary and change, so check them before you buy. A licensed electrician must install the charger to the wiring rules.

Our EV charger guide and the best EV charger comparison explain the choices, and EV charging with solar covers using spare solar output.

Recalls and safety notices

The Clean Energy Council recalls page lists no Fox ESS EV charger notice, and a web search for a Fox ESS charger recall or safety notice in Australia found none. We could not search the ACCC's Product Safety Australia register directly, so check it before you buy.

Where to go next

Read the other Fox ESS EV chargers on the Fox ESS page, or compare every brand in the EV charger reviews.

All specifications

OCPP
Yes
Type
Home EV Charger
Cable
Tethered
Power
7.3kW
Phases
Single
IP rating
IP55
Connector
Type 2
Solar surplus mode
Yes
Connectivity
Wi-Fi, Bluetooth, Ethernet, optional 4G
Load management
Yes

Common questions

How long does the Fox ESS A Series A7300 7.3kW take to charge a car?

At 7.3 kW, a 60 kWh battery charged from empty to full would take about 8.2 hours. The car's onboard charger and your home's supply can make it slower.

Has the Fox ESS A Series A7300 7.3kW been recalled?

The Clean Energy Council recalls page lists no Fox ESS EV charger notice, and a web search for a Fox ESS charger recall or safety notice in Australia found none. We could not search the ACCC's Product Safety Australia register directly, so check it before you buy.

What is the power of the Fox ESS A Series A7300 7.3kW?

It is 7.3kW. Confirm the figure against the manufacturer's datasheet for the exact model number on your quote.

Sources

Customer reviews (0)

No reviews yet

Have you used this product? Leave a review.

Write a review
Up to $8,000+ in solar and battery rebates · Federal rebates step down in 45 daysSee how we calculate this