Solar Panels in Stuart Park
Local prices, rebates, sun and network figures for Stuart Park, so you know the numbers before you talk to anyone. 20% of homes here already have solar.
Northern Territory, STC Zone 2. Power and Water Corporation network.
One Why Solar Approved installer, one free written quote, and fifteen minutes with a solar expert before you sign.
- Homes with solar in 0820
- 20%
- Peak sun hours a day
- 5.5
- Average system
- 11.7 kW
- Typical feed-in tariff, NT
- 8.3c
- Export limit
- 4.5 kW
- Optimal tilt
- 34°
- Installations in 0820
- 1,662
Solar potential in Stuart Park
Stuart Park receives 5.5 peak sun hours per day on average. The optimal panel angle is 34° facing north.
| System | Average day | Year |
|---|---|---|
| 6.6 kW | 30.9 kWh | 11,262 kWh |
| 10 kW | 46.8 kWh | 17,064 kWh |
| 13 kW | 60.8 kWh | 22,183 kWh |
Estimated: system size times 5.5 peak sun hours (the 0820 area average) times 85% for inverter, heat and wiring losses, over 365 average days. The savings and payback above use the same output. Orientation, shading and the equipment your installer quotes change it.
Daily/Monthly System Energy Output Estimates
Here's what you can expect to generate with various sized solar power systems in the Stuart Park 0820 area, assuming good quality components, a suitable rooftop and professional, accredited solar installation.
Mean daily production for 6.6kW of solar panels in Stuart Park, NT, 0820
Estimates based on 5.5 peak sun hours and 85% system efficiency. Actual output varies with panel orientation, shading, and weather.
Monthly Solar Irradiation
Average daily solar energy (kWh/m²/day) reaching the Stuart Park area throughout the year compared to the Australian national average.
Based on Bureau of Meteorology solar exposure data. Actual values may vary based on weather conditions.
Solar in Stuart Park vs National Average
0820 has 19.5 systems per 100 homes, -41% vs the national average (33.3).
Based on 1,662 installations, 5.5 peak sun hours, 11.7kW avg system.
thermostatInsulation impact on solar savings in Stuart Park
How much of your solar generation gets consumed by heating and cooling, based on your home's insulation quality. Data sourced from NatHERS climate zone 1 (Darwin).
Higher self-consumption means less solar energy exported. In a well-insulated home, more generation is exported at the feed-in tariff rate rather than consumed by heating/cooling.
Based on ABCB NatHERS climate zone 1 load limits for a 150m² home. Actual consumption varies by home design, orientation, and occupant behaviour.
Grid connection in Stuart Park
Power and Water Corporation
Your electricity network distributor for Stuart Park.
- Export limit
- 4.5 kW
- Days to connect
- 15
- Typical timeframe
- Pre-approval threshold
- 4.5 kW+
- Systems above it need approval
Feed-in tariffs in Stuart Park
Rate range in NT
Typical usage rate in NT: 28.0c/kWh
Use it before you export it. With the feed-in tariff at 8.3c and usage at 28.0c, every kWh you use yourself saves you 19.7c more than exporting. A battery helps you use more of it.
See what Stuart Park homeowners are paying
6.6 kW systems in 0820 range from $5,980 to $8,625 fully installed, after the $1,900 federal rebate.
How to choose a solar installer in Stuart Park
SAA accreditation
Only use installers accredited by Solar Accreditation Australia (SAA). Accreditation is mandatory for STC rebate eligibility.
A written quote
Get a detailed quote from a vetted local installer. Prices in 0820 range from $5,980 to $8,625 for 6.6 kW.
Tier-1 equipment
Insist on tier-1 panels and a reputable inverter. This protects your 25-year performance warranty.
Local council requirements
No approval required
Most residential solar installations in NT are exempt under the NT Planning Scheme permit exemptions.
- Roof-mounted panels on residential buildings
- Systems under 10kW on single-phase
- No change to building structure
Your SAA installer will handle
- Grid connection application to your DNSP
- Electrical safety certificates
- STC rebate paperwork
- Meter upgrade coordination
Heritage and conservation areas. Heritage areas may require Development Permit. If your home is heritage-listed or in a conservation area, check with your council before you sign.
Local government area
Stuart Park 0820 is in the Unincorporated NT council area. Your installer will handle all necessary paperwork and approvals as part of the installation process.
NT planning portal(opens in a new tab)Solar for heritage homes
Data sources: CER, ABS, BOM, Global Solar Atlas
5.5 kWh/m²/day avg solar exposure · 1,662 installations in 0820 · 20% penetration · BOM station 1.4 km from Stuart Park
Solar trends in the 0820 postcode
- Growth on last year
- 33%
- 86 installs last year
- Average system size
- 11.7 kW
- Installed in 0820
Solar FAQ for Stuart Park
How much does solar cost in Stuart Park 0820?
What's the payback period for solar in Stuart Park?
What rebates are available in NT?
What feed-in tariff can I get in Stuart Park?
Can I export solar power in Stuart Park 0820?
How do I find a good solar installer in Stuart Park 0820?
Is commercial solar available in Stuart Park?
Local data reviewed by
Written by
Andy McMasterSolar Installer Partner Relations
Connects homeowners with trusted, vetted solar installers across Australia. Andy works directly with installation companies to ensure quality standards and helps homeowners through the quoting process.
Learn more about Andy McMasterCheck your rebate in Stuart Park
20% of homes in Stuart Park already have solar. One Why Solar Approved installer, one free written quote, and fifteen minutes with a solar expert before you sign.