Solar Panels in Mount Rumney
Local prices, rebates, sun and network figures for Mount Rumney, so you know the numbers before you talk to anyone. 48% of homes here already have solar.
Tasmania, STC Zone 4. TasNetworks network.
One Why Solar Approved installer, one free written quote, and fifteen minutes with a solar expert before you sign.
- Homes with solar in 7170
- 48%
- Peak sun hours a day
- 3.6
- Average system
- 8.3 kW
- Typical feed-in tariff, TAS
- 8.5c
- Export limit
- 5 kW
- Optimal tilt
- 42°
- Installations in 7170
- 977
Solar potential in Mount Rumney
Mount Rumney receives 3.6 peak sun hours per day on average. The optimal panel angle is 42° facing north.
| System | Average day | Year |
|---|---|---|
| 6.6 kW | 20.2 kWh | 7,372 kWh |
| 10 kW | 30.6 kWh | 11,169 kWh |
| 13 kW | 39.8 kWh | 14,520 kWh |
Estimated: system size times 3.6 peak sun hours (the 7170 area average) times 85% for inverter, heat and wiring losses, over 365 average days. The savings and payback above use the same output. Orientation, shading and the equipment your installer quotes change it.
Daily/Monthly System Energy Output Estimates
Here's what you can expect to generate with various sized solar power systems in the Mount Rumney 7170 area, assuming good quality components, a suitable rooftop and professional, accredited solar installation.
Mean daily production for 6.6kW of solar panels in Mount Rumney, TAS, 7170
Estimates based on 3.6 peak sun hours and 85% system efficiency. Actual output varies with panel orientation, shading, and weather.
Monthly Solar Irradiation
Average daily solar energy (kWh/m²/day) reaching the Mount Rumney area throughout the year compared to the Australian national average.
Based on Bureau of Meteorology solar exposure data. Actual values may vary based on weather conditions.
Solar in Mount Rumney vs National Average
7170 has 47.8 systems per 100 homes, +44% vs the national average (33.3).
Based on 977 installations, 3.6 peak sun hours, 8.3kW avg system.
thermostatInsulation impact on solar savings in Mount Rumney
How much of your solar generation gets consumed by heating and cooling, based on your home's insulation quality. Data sourced from NatHERS climate zone 26 (Hobart).
Higher self-consumption means less solar energy exported. In a well-insulated home, more generation is exported at the feed-in tariff rate rather than consumed by heating/cooling.
Based on ABCB NatHERS climate zone 26 load limits for a 150m² home. Actual consumption varies by home design, orientation, and occupant behaviour.
Grid connection in Mount Rumney
TasNetworks
Your electricity network distributor for Mount Rumney.
- Export limit
- 5 kW
- Days to connect
- 10
- Typical timeframe
- Pre-approval threshold
- 5 kW+
- Systems above it need approval
Feed-in tariffs in Mount Rumney
Rate range in TAS
Typical usage rate in TAS: 27.0c/kWh
Use it before you export it. With the feed-in tariff at 8.5c and usage at 27.0c, every kWh you use yourself saves you 18.5c more than exporting. A battery helps you use more of it.
See what Mount Rumney homeowners are paying
6.6 kW systems in 7170 range from $5,616 to $8,100 fully installed, after the $1,482 federal rebate.
How to choose a solar installer in Mount Rumney
SAA accreditation
Only use installers accredited by Solar Accreditation Australia (SAA). Accreditation is mandatory for STC rebate eligibility.
A written quote
Get a detailed quote from a vetted local installer. Prices in 7170 range from $5,616 to $8,100 for 6.6 kW.
Tier-1 equipment
Insist on tier-1 panels and a reputable inverter. This protects your 25-year performance warranty.
Local council requirements
No approval required
Most residential solar installations in TAS are exempt under the Tasmanian Planning Scheme exemptions.
- Roof-mounted panels on residential buildings
- Systems under 10kW on single-phase
- No change to building structure
Your SAA installer will handle
- Grid connection application to your DNSP
- Electrical safety certificates
- STC rebate paperwork
- Meter upgrade coordination
Heritage and conservation areas. Heritage precincts may have additional requirements. If your home is heritage-listed or in a conservation area, check with your council before you sign.
Local government area
Mount Rumney 7170 is in the Clarence council area. Your installer will handle all necessary paperwork and approvals as part of the installation process.
TAS planning portal(opens in a new tab)Solar for heritage homes
Data sources: CER, ABS, BOM, Global Solar Atlas
3.6 kWh/m²/day avg solar exposure · 977 installations in 7170 · 48% penetration · BOM station 5.9 km from Mount Rumney
Solar trends in the 7170 postcode
- Growth on last year
- -22%
- 82 installs last year
- Average system size
- 8.3 kW
- Installed in 7170
Solar FAQ for Mount Rumney
How much does solar cost in Mount Rumney 7170?
What's the payback period for solar in Mount Rumney?
What rebates are available in TAS?
What feed-in tariff can I get in Mount Rumney?
Can I export solar power in Mount Rumney 7170?
How do I find a good solar installer in Mount Rumney 7170?
Is commercial solar available in Mount Rumney?
Local data reviewed by
Written by
Andy McMasterSolar Installer Partner Relations
Connects homeowners with trusted, vetted solar installers across Australia. Andy works directly with installation companies to ensure quality standards and helps homeowners through the quoting process.
Learn more about Andy McMasterCheck your rebate in Mount Rumney
48% of homes in Mount Rumney already have solar. One Why Solar Approved installer, one free written quote, and fifteen minutes with a solar expert before you sign.