Solar Panels in Kirton Point
Local prices, rebates, sun and network figures for Kirton Point, so you know the numbers before you talk to anyone. 49% of homes here already have solar.
South Australia, STC Zone 3. SA Power Networks network, with flexible exports available.
One Why Solar Approved installer, one free written quote, and fifteen minutes with a solar expert before you sign.
- Homes with solar in 5606
- 49%
- Peak sun hours a day
- 5.5
- Average system
- 6.7 kW
- Typical feed-in tariff, SA
- 8.0c
- Export limit
- 5 kW
- Optimal tilt
- 34°
- Installations in 5606
- 3,194
Solar potential in Kirton Point
Kirton Point receives 5.5 peak sun hours per day on average. The optimal panel angle is 34° facing north.
| System | Average day | Year |
|---|---|---|
| 6.6 kW | 30.9 kWh | 11,262 kWh |
| 10 kW | 46.8 kWh | 17,064 kWh |
| 13 kW | 60.8 kWh | 22,183 kWh |
Estimated: system size times 5.5 peak sun hours (the 5606 area average) times 85% for inverter, heat and wiring losses, over 365 average days. The savings and payback above use the same output. Orientation, shading and the equipment your installer quotes change it.
Daily/Monthly System Energy Output Estimates
Here's what you can expect to generate with various sized solar power systems in the Kirton Point 5606 area, assuming good quality components, a suitable rooftop and professional, accredited solar installation.
Mean daily production for 6.6kW of solar panels in Kirton Point, SA, 5606
Estimates based on 5.5 peak sun hours and 85% system efficiency. Actual output varies with panel orientation, shading, and weather.
Monthly Solar Irradiation
Average daily solar energy (kWh/m²/day) reaching the Kirton Point area throughout the year compared to the Australian national average.
Based on Bureau of Meteorology solar exposure data. Actual values may vary based on weather conditions.
Solar in Kirton Point vs National Average
5606 has 48.9 systems per 100 homes, +47% vs the national average (33.3).
Based on 3,194 installations, 5.5 peak sun hours, 6.7kW avg system.
thermostatInsulation impact on solar savings in Kirton Point
How much of your solar generation gets consumed by heating and cooling, based on your home's insulation quality. Data sourced from NatHERS climate zone 16 (Adelaide).
Higher self-consumption means less solar energy exported. In a well-insulated home, more generation is exported at the feed-in tariff rate rather than consumed by heating/cooling.
Based on ABCB NatHERS climate zone 16 load limits for a 150m² home. Actual consumption varies by home design, orientation, and occupant behaviour.
Grid connection in Kirton Point
SA Power Networks
Your electricity network distributor for Kirton Point.
- Export limit
- 5 kW
- Flexible exports available
- Days to connect
- 10
- Typical timeframe
- Pre-approval threshold
- 5 kW+
- Systems above it need approval
Feed-in tariffs in Kirton Point
Rate range in SA
Typical usage rate in SA: 35.0c/kWh
Use it before you export it. With the feed-in tariff at 8.0c and usage at 35.0c, every kWh you use yourself saves you 27.0c more than exporting. A battery helps you use more of it.
See what Kirton Point homeowners are paying
6.6 kW systems in 5606 range from $5,304 to $7,650 fully installed, after the $1,710 federal rebate.
How to choose a solar installer in Kirton Point
SAA accreditation
Only use installers accredited by Solar Accreditation Australia (SAA). Accreditation is mandatory for STC rebate eligibility.
A written quote
Get a detailed quote from a vetted local installer. Prices in 5606 range from $5,304 to $7,650 for 6.6 kW.
Tier-1 equipment
Insist on tier-1 panels and a reputable inverter. This protects your 25-year performance warranty.
Local council requirements
No approval required
Most residential solar installations in SA are exempt under the Planning, Development and Infrastructure Act 2016.
- Roof-mounted panels on residential buildings
- Systems under 10kW on single-phase
- No change to building structure
Your SAA installer will handle
- Grid connection application to your DNSP
- Electrical safety certificates
- STC rebate paperwork
- Meter upgrade coordination
Heritage and conservation areas. Historic conservation areas require Development Approval. If your home is heritage-listed or in a conservation area, check with your council before you sign.
Local government area
Kirton Point 5606 is in the Unincorporated SA council area. Your installer will handle all necessary paperwork and approvals as part of the installation process.
SA planning portal(opens in a new tab)Solar for heritage homes
Data sources: CER, ABS, BOM, Global Solar Atlas
5.5 kWh/m²/day avg solar exposure · 3,194 installations in 5606 · 49% penetration · BOM station 242.2 km from Kirton Point
Solar trends in the 5606 postcode
- Growth on last year
- 9%
- 94 installs last year
- Average system size
- 6.7 kW
- Installed in 5606
Solar FAQ for Kirton Point
How much does solar cost in Kirton Point 5606?
What's the payback period for solar in Kirton Point?
What rebates are available in SA?
What feed-in tariff can I get in Kirton Point?
Can I export solar power in Kirton Point 5606?
How do I find a good solar installer in Kirton Point 5606?
Is commercial solar available in Kirton Point?
Local data reviewed by
Written by
Andy McMasterSolar Installer Partner Relations
Connects homeowners with trusted, vetted solar installers across Australia. Andy works directly with installation companies to ensure quality standards and helps homeowners through the quoting process.
Learn more about Andy McMasterCheck your rebate in Kirton Point
49% of homes in Kirton Point already have solar. One Why Solar Approved installer, one free written quote, and fifteen minutes with a solar expert before you sign.