Solar Panels in Colliver
Local prices, rebates, sun and network figures for Colliver, so you know the numbers before you talk to anyone. 43% of homes here already have solar.
Victoria, STC Zone 3. CitiPower network, with flexible exports available.
One Why Solar Approved installer, one free written quote, and fifteen minutes with a solar expert before you sign.
- Homes with solar in 3630
- 43%
- Peak sun hours a day
- 4.5
- Average system
- 6.6 kW
- Typical feed-in tariff, VIC
- 5.5c
- Export limit
- 5 kW
- Optimal tilt
- 37°
- Installations in 3630
- 5,552
Solar potential in Colliver
Colliver receives 4.5 peak sun hours per day on average. The optimal panel angle is 37° facing north.
| System | Average day | Year |
|---|---|---|
| 6.6 kW | 25.2 kWh | 9,214 kWh |
| 10 kW | 38.3 kWh | 13,961 kWh |
| 13 kW | 49.7 kWh | 18,150 kWh |
Estimated: system size times 4.5 peak sun hours (the 3630 area average) times 85% for inverter, heat and wiring losses, over 365 average days. The savings and payback above use the same output. Orientation, shading and the equipment your installer quotes change it.
Daily/Monthly System Energy Output Estimates
Here's what you can expect to generate with various sized solar power systems in the Colliver 3630 area, assuming good quality components, a suitable rooftop and professional, accredited solar installation.
Mean daily production for 6.6kW of solar panels in Colliver, VIC, 3630
Estimates based on 4.5 peak sun hours and 85% system efficiency. Actual output varies with panel orientation, shading, and weather.
Monthly Solar Irradiation
Average daily solar energy (kWh/m²/day) reaching the Colliver area throughout the year compared to the Australian national average.
Based on Bureau of Meteorology solar exposure data. Actual values may vary based on weather conditions.
Solar in Colliver vs National Average
3630 has 42.7 systems per 100 homes, +28% vs the national average (33.3).
Based on 5,552 installations, 4.5 peak sun hours, 6.6kW avg system.
thermostatInsulation impact on solar savings in Colliver
How much of your solar generation gets consumed by heating and cooling, based on your home's insulation quality. Data sourced from NatHERS climate zone 21 (Melbourne).
Higher self-consumption means less solar energy exported. In a well-insulated home, more generation is exported at the feed-in tariff rate rather than consumed by heating/cooling.
Based on ABCB NatHERS climate zone 21 load limits for a 150m² home. Actual consumption varies by home design, orientation, and occupant behaviour.
Grid connection in Colliver
CitiPower
Your electricity network distributor for Colliver.
- Export limit
- 5 kW
- Flexible exports available
- Days to connect
- 10
- Typical timeframe
- Pre-approval threshold
- 5 kW+
- Systems above it need approval
Feed-in tariffs in Colliver
Rate range in VIC
Typical usage rate in VIC: 28.0c/kWh
Use it before you export it. With the feed-in tariff at 5.5c and usage at 28.0c, every kWh you use yourself saves you 22.5c more than exporting. A battery helps you use more of it.
See what Colliver homeowners are paying
6.6 kW systems in 3630 range from $4,940 to $7,125 fully installed, after the $1,710 federal rebate.
How to choose a solar installer in Colliver
SAA accreditation
Only use installers accredited by Solar Accreditation Australia (SAA). Accreditation is mandatory for STC rebate eligibility.
A written quote
Get a detailed quote from a vetted local installer. Prices in 3630 range from $4,940 to $7,125 for 6.6 kW.
Tier-1 equipment
Insist on tier-1 panels and a reputable inverter. This protects your 25-year performance warranty.
Local council requirements
No approval required
Most residential solar installations in VIC are exempt under the VicSmart planning permit exemptions.
- Roof-mounted panels on residential buildings
- Systems under 10kW on single-phase
- No change to building structure
Your SAA installer will handle
- Grid connection application to your DNSP
- Electrical safety certificates
- STC rebate paperwork
- Meter upgrade coordination
Heritage and conservation areas. Heritage overlay properties may need a planning permit. If your home is heritage-listed or in a conservation area, check with your council before you sign.
Local government area
Colliver 3630 is in the Greater Shepparton council area. Your installer will handle all necessary paperwork and approvals as part of the installation process.
VIC planning portal(opens in a new tab)Solar for heritage homes
Data sources: CER, ABS, BOM, Global Solar Atlas
4.5 kWh/m²/day avg solar exposure · 5,552 installations in 3630 · 43% penetration · BOM station 102.7 km from Colliver
Solar trends in the 3630 postcode
- Growth on last year
- 8%
- 261 installs last year
- Average system size
- 6.6 kW
- Installed in 3630
Solar FAQ for Colliver
How much does solar cost in Colliver 3630?
What's the payback period for solar in Colliver?
What rebates are available in VIC?
What feed-in tariff can I get in Colliver?
Can I export solar power in Colliver 3630?
How do I find a good solar installer in Colliver 3630?
Is commercial solar available in Colliver?
Local data reviewed by
Written by
Andy McMasterSolar Installer Partner Relations
Connects homeowners with trusted, vetted solar installers across Australia. Andy works directly with installation companies to ensure quality standards and helps homeowners through the quoting process.
Learn more about Andy McMasterCheck your rebate in Colliver
43% of homes in Colliver already have solar. One Why Solar Approved installer, one free written quote, and fifteen minutes with a solar expert before you sign.