Solar Panels in Bonshaw
Prices, rebates, sun and network figures for Bonshaw, so you know the numbers before you talk to anyone. 32% of homes here already have solar.
Victoria, STC Zone 3. CitiPower network, with flexible exports available.
One Why Solar Approved installer, one free written quote, and fifteen minutes with a solar expert before you sign.
- Homes with solar in 3356
- 32%
- Peak sun hours a day
- 4.3
- Average system
- 6.6 kW
- Typical feed-in tariff, VIC
- 5.5c
- Export limit
- 5 kW
- Optimal tilt
- 37°
- Installations in 3356
- 2,170
Solar potential in Bonshaw
Bonshaw receives 4.3 peak sun hours per day on average. The optimal panel angle is 37° facing north.
| System | Average day | Year |
|---|---|---|
| 6.6 kW | 24.1 kWh | 8,805 kWh |
| 10 kW | 36.6 kWh | 13,341 kWh |
| 13 kW | 47.5 kWh | 17,343 kWh |
Estimated: system size times 4.3 peak sun hours (the 3356 area average) times 85% for inverter, heat and wiring losses, over 365 average days. Orientation, shading and the equipment on your quote change it.
Daily/Monthly System Energy Output Estimates
Here's what you can expect to generate with various sized solar power systems in the Bonshaw 3356 area, assuming good quality components, a suitable rooftop and professional, accredited solar installation.
Mean daily production for 6.6kW of solar panels in Bonshaw, VIC, 3356
Estimates based on 4.3 peak sun hours and 85% system efficiency. Actual output varies with panel orientation, shading, and weather.
Monthly Solar Irradiation
Average daily solar energy (kWh/m²/day) reaching the Bonshaw area throughout the year compared to the Australian national average.
Based on Bureau of Meteorology solar exposure data. Actual values may vary based on weather conditions.
Solar in Bonshaw vs National Average
3356 has 31.5 systems per 100 homes, -5% vs the national average (33.3).
Based on 2,170 installations, 4.3 peak sun hours, 6.6kW avg system.
thermostatInsulation impact on solar savings in Bonshaw
How much of your solar generation gets consumed by heating and cooling, based on your home's insulation quality. Data sourced from NatHERS climate zone 21 (Melbourne).
Higher self-consumption means less solar energy exported. In a well-insulated home, more generation is exported at the feed-in tariff rate rather than consumed by heating/cooling.
Based on ABCB NatHERS climate zone 21 load limits for a 150m² home. Actual consumption varies by home design, orientation, and occupant behaviour.
Grid connection in Bonshaw
CitiPower
Your electricity network distributor for Bonshaw.
- Export limit
- 5 kW
- Flexible exports available
- Days to connect
- 10
- Typical timeframe
- Pre-approval threshold
- 5 kW+
- Systems above it need approval
Feed-in tariffs in Bonshaw
Rate range in VIC
Typical usage rate in VIC: 28.0c/kWh
Use it before you export it. With the feed-in tariff at 5.5c and usage at 28.0c, every kWh you use yourself saves you 22.5c more than exporting. A battery helps you use more of it.
See what Bonshaw homeowners are paying
How to choose a solar installer in Bonshaw
SAA accreditation
Only use installers accredited by Solar Accreditation Australia (SAA). Accreditation is mandatory for STC rebate eligibility.
A written quote
Get a detailed quote from a vetted local installer.
Tier-1 equipment
Insist on tier-1 panels and a reputable inverter. This protects your 25-year performance warranty.
Local council requirements
No approval required
Most residential solar installations in VIC are exempt under the VicSmart planning permit exemptions.
- Roof-mounted panels on residential buildings
- Systems under 10kW on single-phase
- No change to building structure
Your SAA installer will handle
- Grid connection application to your DNSP
- Electrical safety certificates
- STC rebate paperwork
- Meter upgrade coordination
Heritage and conservation areas. Heritage overlay properties may need a planning permit. If your home is heritage-listed or in a conservation area, check with your council before you sign.
Local government area
Bonshaw 3356 is in the Ballarat council area. Your installer will handle all necessary paperwork and approvals as part of the installation process.
VIC planning portal(opens in a new tab)Solar for heritage homes
Data sources: CER, ABS, BOM, Global Solar Atlas
4.3 kWh/m²/day avg solar exposure · 2,170 installations in 3356 · 32% penetration · BOM station 10.3 km from Bonshaw
Solar trends in the 3356 postcode
- Growth on last year
- -21%
- 74 installs last year
- Average system size
- 6.6 kW
- Installed in 3356
Solar FAQ for Bonshaw
How much does solar cost in Bonshaw 3356?
What decides how much solar saves in Bonshaw?
What rebates are available in VIC?
What feed-in tariff can I get in Bonshaw?
Can I export solar power in Bonshaw 3356?
How do I find a good solar installer in Bonshaw 3356?
Is commercial solar available in Bonshaw?
Local data reviewed by

Written by
Andy McMasterSolar Installer Partner Relations
Connects homeowners with trusted, vetted solar installers across Australia. Andy works directly with installation companies to ensure quality standards and helps homeowners through the quoting process.
Learn more about Andy McMasterCheck your rebate in Bonshaw
32% of homes in Bonshaw already have solar. One Why Solar Approved installer, one free written quote, and fifteen minutes with a solar expert before you sign.