Pylontech US Series US5000B 4.8kWh, photo 1 of 1
Pylontech logoPylontechBattery

US Series US5000B 4.8kWh

Type
Battery Module
Power
3.8kW continuous
Weight
39.7kg
Voltage
48V DC

Warranty: 10 years

See my rebate

One Why Solar Approved installer, one written quote, and a 15-minute call with a solar expert before you sign.

Rebate eligibility: government rebates only apply when the exact model number installed is on the current CEC approved list. See all 1 approved Pylontech models in this range or check a model number.

Specifications last updated

The Pylontech US Series US5000B 4.8kWh is a battery from Pylontech. Its main specifications are type Battery Module, power 3.8kW continuous, weight 39.7kg, voltage 48V DC. The warranty is 10 years.

The specifications on this page were checked against the manufacturer's documents and the Clean Energy Council lists on 26 October 2026. Ratings and model codes can still differ between regions and production runs, so confirm the exact model number on your quote.

Availability in Australia

Sold new in Australia. Pylontech's Australian site lists the US5000B as its latest low voltage battery and hosts the Australian warranty and datasheet. It is rated IP20, so it must go indoors or in a Pylontech approved outdoor enclosure.

What the specifications mean

Usable capacity is the energy you can actually draw, and for this model it is 4.56 kWh. On these figures, run flat out at 3.8 kW continuous it would last about 1.2 hours, and in real homes the load is usually lower than the maximum, so it lasts longer. The power a battery actually delivers is also limited by the inverter it is paired with.

It does not have an integrated inverter, so it needs a compatible hybrid or battery inverter. The compatible models are set by the manufacturer, so confirm the pairing before you buy.

Rebate eligibility

The federal Cheaper Home Batteries program pays only on batteries that are on the Clean Energy Council approved list, and it is the exact model number that counts. On that capacity, a battery of 4.56 kWh usable would earn 31 certificates on an install today, about $1,240 at $40 each, and 25 from 1 January 2027 when the factor steps down. State programs are separate.

The approved list shows: Listed on the Clean Energy Council approved battery list under certificate BAT-759 (Pylon Technologies Co Ltd, series US), models US5000 and US5000-B, 4.8kWh nominal and 4.56kWh usable, 3.8kW rated DC power, indoor use only. Approved 14 January 2026, expires 31 December 2027.

Check the model on the approved battery list first. The federal rebate page has the full working, and your quote should show the certificate count as its own line.

Recalls and safety notices

The Clean Energy Council's product recalls page, checked on 26 October 2026, has no notice for Pylontech batteries. A web search for Pylontech US5000 recall in Australia also found no recall or safety notice. We could not search the ACCC's Product Safety Australia register directly, so check it before you buy.

Where to go next

Read the other Pylontech batteries on the Pylontech page, or compare every brand in the battery reviews.

Other Pylontech batteries

ModelUsable capacityPower
US Series US5000B 4.8kWh (this page)4.56kWh3.8kW continuous
Force H3 15.36kWhNot stated15.36kW continuous

Open a product for its full specification and sources.

All specifications

Type
Battery Module
Power
3.8kW continuous
Weight
39.7kg
Voltage
48V DC
Capacity
4.8kWh
IP rating
IP20
Chemistry
LFP
Dimensions (mm)
442x161x420mm
Max modules
16
Usable capacity
4.56kWh
Integrated inverter
No

Common questions

How much is the federal rebate on a battery of 4.56 kWh?

If the exact model is on the Clean Energy Council approved list, a battery of 4.56 kWh usable capacity earns about 31 certificates on an install today, roughly $1,240 at $40 each. From 1 January 2027 it falls to about 25 certificates. If the model is not on the list, it earns nothing.

Has the Pylontech US Series US5000B 4.8kWh been recalled?

The Clean Energy Council's product recalls page, checked on 26 October 2026, has no notice for Pylontech batteries. A web search for Pylontech US5000 recall in Australia also found no recall or safety notice. We could not search the ACCC's Product Safety Australia register directly, so check it before you buy.

What warranty does the Pylontech US Series US5000B 4.8kWh come with?

The warranty is 10 years. Warranty terms differ in what they cover, such as product defects versus performance, and in who must install the product, so read the manufacturer's current warranty document for your region before you buy.

Is the Pylontech US Series US5000B 4.8kWh on the Clean Energy Council approved list?

Yes. Listed on the Clean Energy Council approved battery list under certificate BAT-759 (Pylon Technologies Co Ltd, series US), models US5000 and US5000-B, 4.8kWh nominal and 4.56kWh usable, 3.8kW rated DC power, indoor use only. Approved 14 January 2026, expires 31 December 2027. Approval is by exact model number and it can change, so check the model number on your quote against the list.

What is the power of the Pylontech US Series US5000B 4.8kWh?

It is 3.8kW continuous. Confirm the figure against the manufacturer's datasheet for the exact model number on your quote.

Sources

Customer reviews (0)

No reviews yet

Have you used this product? Leave a review.

Write a review
Up to $8,000+ in solar and battery rebates · Federal rebates step down in 45 daysSee how we calculate this