
Powerbox G2 10.24kWh
- Type
- Battery Module
- Power
- 5.12kW continuous
- Weight
- 99.7kg
- Voltage
- 51.2V DC
Warranty: 10 years
One Why Solar Approved installer, one written quote, and a 15-minute call with a solar expert before you sign.
Specifications last updated
The Dyness Powerbox G2 10.24kWh is a battery from Dyness. Its main specifications are type Battery Module, power 5.12kW continuous, weight 99.7kg, voltage 51.2V DC. The warranty is 10 years.
The specifications on this page were checked against the manufacturer's documents and the Clean Energy Council lists on 26 October 2026. Ratings and model codes can still differ between regions and production runs, so confirm the exact model number on your quote.
Availability in Australia
Sold new in Australia. Dyness Australia's site lists the Powerbox G2 first in its home battery range and hosts an Australian datasheet and warranty terms. It is a low voltage battery that works with a compatible third party hybrid inverter.
What the specifications mean
Usable capacity is the energy you can actually draw, and for this model it is 9.73 kWh. On these figures, run flat out at 5.1 kW continuous it would last about 1.9 hours, and in real homes the load is usually lower than the maximum, so it lasts longer. The power a battery actually delivers is also limited by the inverter it is paired with.
It does not have an integrated inverter, so it needs a compatible hybrid or battery inverter. The compatible models are set by the manufacturer, so confirm the pairing before you buy.
Rebate eligibility
The federal Cheaper Home Batteries program pays only on batteries that are on the Clean Energy Council approved list, and it is the exact model number that counts. On that capacity, a battery of 9.73 kWh usable would earn 66 certificates on an install today, about $2,640 at $40 each, and 55 from 1 January 2027 when the factor steps down. State programs are separate.
The approved list shows: Listed on the Clean Energy Council approved battery list under certificate BAT-629 (Dyness Digital Energy Technology Co Ltd), model Powerbox G2, 10.24kWh nominal and 9.728kWh usable, 10.24kW rated DC power. Approved 7 July 2025, expires 31 December 2027.
Check the model on the approved battery list first. The federal rebate page has the full working, and your quote should show the certificate count as its own line.
Recalls and safety notices
The Clean Energy Council's product recalls page, checked on 26 October 2026, has no notice for Dyness batteries. A web search for Dyness Powerbox recall in Australia also found no recall or safety notice. We could not search the ACCC's Product Safety Australia register directly, so check it before you buy.
Where to go next
Read the other Dyness batteries on the Dyness page, or compare every brand in the battery reviews.
All specifications
- Type
- Battery Module
- Power
- 5.12kW continuous
- Weight
- 99.7kg
- Voltage
- 51.2V DC
- Capacity
- 10.24kWh
- IP rating
- IP66
- Chemistry
- LFP
- Dimensions (mm)
- 710x640x165mm
- Max modules
- 50
- Usable capacity
- 9.728kWh
- Integrated inverter
- No
Common questions
How much is the federal rebate on a battery of 9.73 kWh?
If the exact model is on the Clean Energy Council approved list, a battery of 9.73 kWh usable capacity earns about 66 certificates on an install today, roughly $2,640 at $40 each. From 1 January 2027 it falls to about 55 certificates. If the model is not on the list, it earns nothing.
Has the Dyness Powerbox G2 10.24kWh been recalled?
The Clean Energy Council's product recalls page, checked on 26 October 2026, has no notice for Dyness batteries. A web search for Dyness Powerbox recall in Australia also found no recall or safety notice. We could not search the ACCC's Product Safety Australia register directly, so check it before you buy.
What warranty does the Dyness Powerbox G2 10.24kWh come with?
The warranty is 10 years. Warranty terms differ in what they cover, such as product defects versus performance, and in who must install the product, so read the manufacturer's current warranty document for your region before you buy.
Is the Dyness Powerbox G2 10.24kWh on the Clean Energy Council approved list?
Yes. Listed on the Clean Energy Council approved battery list under certificate BAT-629 (Dyness Digital Energy Technology Co Ltd), model Powerbox G2, 10.24kWh nominal and 9.728kWh usable, 10.24kW rated DC power. Approved 7 July 2025, expires 31 December 2027. Approval is by exact model number and it can change, so check the model number on your quote against the list.
What is the power of the Dyness Powerbox G2 10.24kWh?
It is 5.12kW continuous. Confirm the figure against the manufacturer's datasheet for the exact model number on your quote.
Sources
- Dyness Australia, Powerbox G2 product page, checked 26 October 2026.
- Dyness Powerbox G2 datasheet, file version 20250812 EN(AU) (Dyness Australia download), checked 26 October 2026.
- Dyness Warranty Terms for Energy Storage Solutions, Powerbox G2 (Australia), checked 26 October 2026.
- Clean Energy Council approved battery list, certificate BAT-629, checked 26 October 2026.
- Clean Energy Council product recalls page, checked 26 October 2026.