
DS3D-H-AU
- MPPT trackers
- 2
- Type
- Microinverter
- Max AC output
- 2.0kW
- Max DC input
- 2.1kW
Warranty: 12 years
One Why Solar Approved installer, one written quote, and a 15-minute call with a solar expert before you sign.
Specifications last updated
The APsystems DS3D-H-AU is an inverter from APsystems. Its main specifications are MPPT trackers 2, type Microinverter, max AC output 2.0kW, max DC input 2.1kW. The warranty is 12 years.
The specifications on this page were checked against the manufacturer's documents and the Clean Energy Council lists on 26 October 2026. Ratings and model codes can still differ between regions and production runs, so confirm the exact model number on your quote.
Availability in Australia
APsystems Australia publishes an Australian edition datasheet for the DS3D-AU series (revision 1.6, September 2025) and its Australian warranty covers DS3D microinverters installed from 1 January 2025. The DS3D-H-AU is on the Clean Energy Council approved inverter list until 25 November 2027.
What the specifications mean
It has an AC output of 2 kW and a maximum DC input of 2.1 kW, a ratio of 1.05 to 1. Panels are often sized above the inverter rating, because the array rarely produces its full rated output, but how far you can go is set by the manufacturer and your network.
It has 2 MPPT inputs. Each input tracks one group of panels independently, which helps when panels face different directions or one section is shaded at times.
It is a single phase unit. Match it to your home's supply, and ask your installer if you are unsure which you have.
Peak efficiency is rated at 97%. That is the best case under test conditions, so real-world efficiency over a year is a little lower.
Rebate eligibility
The federal solar rebate is paid on the system, and the inverter model must be on the Clean Energy Council approved list. Check the exact model on the approved list before you accept a quote.
The approved list shows: Listed as DS3D-H-AU (AS4777-2 2020), certificate CS11130N, approved 24 November 2025 and listed until 25 November 2027. The Clean Energy Council classes it as a grid connect PV inverter.
Recalls and safety notices
The Clean Energy Council product recalls page, read on 26 October 2026, lists no recall or safety notice for APsystems or the DS3D-H-AU. A web search for APsystems recall Australia also found no recall or safety notice for this model. We could not search the ACCC's Product Safety Australia register directly, so check it before you buy.
Where to go next
Read the other APsystems inverters on the APsystems page, or compare every brand in the inverter reviews.
All specifications
- MPPT trackers
- 2
- Type
- Microinverter
- Max AC output
- 2.0kW
- Max DC input
- 2.1kW
- Hybrid inverter
- No
- Phases
- Single
- Weight
- 4.3kg
- IP rating
- IP67
- Dimensions (mm)
- 234x284x50.2mm
- Efficiency
- 97%
- Battery compatible
- No
Common questions
Has the APsystems DS3D-H-AU been recalled?
The Clean Energy Council product recalls page, read on 26 October 2026, lists no recall or safety notice for APsystems or the DS3D-H-AU. A web search for APsystems recall Australia also found no recall or safety notice for this model. We could not search the ACCC's Product Safety Australia register directly, so check it before you buy.
What warranty does the APsystems DS3D-H-AU come with?
The warranty is 12 years. Warranty terms differ in what they cover, such as product defects versus performance, and in who must install the product, so read the manufacturer's current warranty document for your region before you buy.
Is the APsystems DS3D-H-AU on the Clean Energy Council approved list?
Yes. Listed as DS3D-H-AU (AS4777-2 2020), certificate CS11130N, approved 24 November 2025 and listed until 25 November 2027. The Clean Energy Council classes it as a grid connect PV inverter. Approval is by exact model number and it can change, so check the model number on your quote against the list.
What is the max AC output of the APsystems DS3D-H-AU?
It is 2.0kW. Confirm the figure against the manufacturer's datasheet for the exact model number on your quote.
Sources
- APsystems DS3D-AU microinverter datasheet for Australia and New Zealand, Rev 1.6, 22 September 2025 (hosted copy at solarproof.com.au), checked 26 October 2026.
- APsystems Microinverter Limited Warranty, Australia and New Zealand, for products installed on or after 1 January 2025 (hosted copy at solarproof.com.au), checked 26 October 2026.
- APsystems global site, Australia and New Zealand website launch notice, checked 26 October 2026.
- Clean Energy Council approved inverter list (searched by brand and model), checked 26 October 2026.
- Clean Energy Council product recalls page, checked 26 October 2026.